Brakes #2

Front

When using a brake drum lathe, the technician should always use

Back

a vibration damper belt and safety glasses.

Front

The type of disc brake calipers found on most American automobiles is

Back

single-piston floating

Front

A disc brake rotor's total indicated runout reading should be

Back

0.005 inch or less

Front

When checking for parallelism on a disc brake rotor, the technician should use a

Back

micrometer

Front

For lateral runout, a technician should use a

Back

dial indicator

Front

An ABS system will

Back

decrease braking force on selected wheels

Front

When replacing the left front caliper on a diagonally spilt brake system, the correct bleeding sequence is

Back

right rear - left front

Front

When turning a scored brake drum, the maximum oversize limit for most automobiles would be

Back

0.060

Front

A brake pedal that slowly goes to the floor when the brakes are applied with no fluid loss could indicate the

Back

master cylinder is defective

Front

If all four wheels tend to slowly lock up while driving, the most likely trouble would be in the

Back

master cylinder