Chapter 28 : Router - Safety Test

Front

The part used to hold bits in a portable router is the _____________.

Back

collet

Front

When starting a cut with the router, the bit should ________.

Back

not be in contact with the stock.

Front

Feeding the router too fast will result in _________.

Back

excessive wear

Front

Which is not a safety precaution for the router _________? Options: a. wear safety glasses, b. hold the router with both hands, d. disconnect electrical power before changing bits

Back

use a bit with a pilot end

Front

When changing cutters, one should insert the shank of the bit _________ inch into the chuck.

Back

1⁄2

Front

Cutting with the router is more efficient if the router is moved ________.

Back

left to right

Front

Which of the following should be observed when using a router _________: do not stand in wet or damp places, wear a dust mask, neither a or b, both a and b?

Back

both a and b

Front

The depth of cut adjustment on the router is made by turning the _________.

Back

micrometer depth adjustment

Front

After a cut is completed, one should _________.

Back

shut off motor

Front

To prevent splintering at the corners, one should cut the ________ ________ first.

Back

middle section