Get Shop Safety - Portable Router Online Flashcard

Front

Adjust the depth of cut

Back

Before you plug in the router

Front

After you are finished with a cut, turn off the router and

Back

Wait until router bit stops rotating before lifting router from the work piece

Front

Due to the rotation direction of the cutter, the operator needs to feed the router

Back

From left to right

Front

Material should be: Sanded, Softwoods only, All of these, Clamped to keep material secure

Back

Clamped to keep material secure

Front

Moving the router too fast will

Back

Create a rough cut

Front

Personal protective equipment for the router includes: Safety glasses, hearing protection and gloves; Safety glasses; Safety glasses and hearing protection; Safety glasses, hearing protection, gloves and face shield

Back

Safety glasses and hearing protection

Front

The bit must be inserted at least _______ into the collet.

Back

1/2"

Front

The correct procedure for holding the router while making a cut is to hold _________.

Back

Both guide knobs firmly, one with each hand

Front

The part that holds the bit in a router is called the

Back

Collet

Front

When changing bits, make sure router is unplugged.

Back

Make sure router is unplugged.