Untitled Lesson

NOA-No. 20-0922.32

Expiration Date: July 18, 2023

Approval Date: November 25, 2020

Page 1

MIAMI-DADE COUNTY

PRODUCT CONTROL SECTION

11805 SW 26 Street, Room 208

DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

Miami, Florida 33175-2474

BOARD AND CODE ADMINISTRATION DIVISION

T [phone] F [phone]

NOTICE OF ACCEPTANCE (NOA)

www.miamidade.gov/economy

Clopay Corporation
8585 Duke Boulevard
Mason, OH 45040

SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be used in
Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section (In
Miami-Dade County) and/ or the AHJ (in areas other than Miami-Dade County) reserve the right to have this product or
material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use of such
product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is determined by Miami-
Dade County Product Control Section that this product or material fails to meet the requirements of the applicable building
code.
This product is approved as described herein and has been designed to comply with the Florida Building Code, including the
High Velocity Hurricane Zone.

DESCRIPTION: 2in Gallery EPS Insulated W6 DP38T Steel Sectional Garage Door up to 16ft-2in
Wide w/ Optional Impact Resistant Lites
APPROVAL DOCUMENT: Drawing No. 104785, titled “2” Gallery EPS Doors 16’2”W”, sheets 1
through 3 of 3, dated 01/10/2013, with revision 06 dated 08/28/2020, prepared by Clopay Corporation, dated
09/10/2020, signed and sealed by Scott Hamilton, P.E., bearing the Miami-Dade County Product Control
revision stamp with the Notice of Acceptance number and expiration date by the Miami-Dade County
Product Control Section.
MISSILE IMPACT RATING: Large and Small Missile Impact Resistant
LABELING: A permanent label with the manufacturer’s name or logo, manufacturing address, model number, the
positive and negative design pressure rating, indicate impact rated if applicable, installation instruction drawing
reference number, approval number (NOA), the applicable test standards, and the statement reading ‘Miami-Dade
County Product Control Approved’ is to be located on the door’s side track, bottom angle, or inner surface of a panel.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in
the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/ or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for
sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall
be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA # 18-0510.02 and consists of this page 1 and evidence pages E-1, E-2, E-3 and E-4,
as well as approval document mentioned above.
The submitted documentation was reviewed by Carlos M. Utrera, P.E.

Carlos M. Utrera, P.E.

Product Control Examiner

NOA-No. 20-0922.32

Expiration Date: July 18, 2023

Approval Date: November 25, 2020

E - 1

Clopay Corporation

NOTICE OF ACCEPTANCE:

EVIDENCE SUBMITTED

1.EVIDENCE SUBMITTED UNDER PREVIOUS NOA’S

A.DRAWINGS“Submitted under NOA # 14-0203.06”
1.Drawing No. 104785, titled “2” Gallery EPS Doors 16’2”W”, sheets 1 through 3 of 3, dated
01/10/2013, with revision 04 dated 09/20/2016, prepared by Clopay Building Products
Company, signed and sealed by Scott Hamilton, P.E.

B.TESTS “Submitted under NOA # 14-0203.06”
1.

Test reports on 1) Uniform Static Air Pressure Test, Loading per FBC TAS 202-94

2) Large Missile Impact Test per FBC, TAS 201-94
3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
4) Forced Entry Test per FBC, TAS 202-94

5) Tensile Test per ASTM E8
Along with marked-up drawings and installation diagram of 16’2”x 8’, 27ga steel garage door
Model GD2LPW8 with windows, prepared by American Test Lab, Inc., Test Report No.
ATLNC1202.02-13, dated 01/14/2014, signed and sealed by David W. Johnson, P.E.

“Submitted under NOA # 13-0423.15”

2.

Test reports on 1) Uniform Static Air Pressure Test, Loading per FBC TAS 202-94

2) Large Missile Impact Test per FBC, TAS 201-94
3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
4) Forced Entry Test, per FBC, TAS 202-94

5) Tensile Test per ASTM E8
Along with marked-up drawings and installation diagram of 16’2”x 8’, 27ga steel garage door
Model GD2LPW6 with windows, prepared by American Test Lab, Inc., Test Report No.
ATLNC0115-01-13R, dated 03/18/2013, signed and sealed by David W. Johnson, P.E.
3.

Test report on Salt Spray per ASTM B117 of painted G40 galvanized coated panels, prepared
by Stork Materials Technology, Test Report No. 30160-04-63365, dated 01/26/2005, signed
by John D. Lee, P.E.

C.

CALCULATIONS “Submitted under NOA # 13-0423.15”
1.Jamb anchor calculations prepared by Clopay Building Products Company, dated 04/16/2013,
signed and sealed by Scott Hamilton, P.E.

D.QUALITY ASSURANCE
1.

Miami-Dade Department of Regulatory and Economic Resources (RER).

E.MATERIAL CERTIFICATIONS
1.

Notice of Acceptance No. 13-0717.01 issued toSABIC Innovative Plastics for their Lexan
Polycarbonate Sheet Products, approved on 11/28/2013, expiring on 07/17/2018.
2.Test report on Surface Burning Characteristics, per ASTM E84 of Type I EPS, Test Report
No. 3082960-500, prepared by Intertek Testing Services, NA, Inc., dated 10/04/2005, signed
by Javier Trevino.

Carlos M. Utrera, P.E.

Product Control Examiner

NOA-No. 20-0922.32

Expiration Date: July 18, 2023

Approval Date: November 25, 2020

E - 2

Clopay Corporation

NOTICE OF ACCEPTANCE:

EVIDENCE SUBMITTED

E.MATERIAL CERTIFICATIONS (Continued)
3.

Test report on Ignition Properties of Plastics per ASTM D1929 of Type I EPS, Test
Report No. 3082959-500, prepared by Intertek Testing Services, NA, Inc., dated
09/16/2005, signed by C. Anthony Peñaloza.

F.STATEMENTS “Submitted under NOA # 15-0225.21”
1.

Statement letter of code conformance with the 2010 and the 5th edition (2014) FBC
issued by Clopay Building Products Company, dated 02/18/2015, signed and sealed
by Scott Hamilton, P.E.

“Submitted under NOA # 13-0423.15”
2.

Statement letters of code conformance to 2010 FBC and no financial interest, both
issued by Clopay Building Products Company, dated 04/16/2013, signed and sealed
by Scott Hamilton, P.E.


2.EVIDENCE SUBMITTED UNDER PREVIOUS NOA’S

A.DRAWINGS“Submitted under NOA # 17-1016.26”
1.Drawing No. 104785, titled “2” Gallery EPS Doors 16’2”W”, sheets 1 through 3 of 3,
dated 01/10/2013, with revision 05 dated 07/18/2017, prepared by Clopay Building
Products Company, signed and sealed by Scott Hamilton, P.E.

B.

TESTS

1.

None.

C.

CALCULATIONS
1.None.

D.QUALITY ASSURANCE
1.

Miami-Dade Department of Regulatory and Economic Resources (RER).

E.MATERIAL CERTIFICATIONS
1.

None.

F.

STATEMENTS “Submitted under NOA # 17-1016.26”
1.

Statement letter of code conformance to the 6th edition (2017) FBC issued by Clopay
Building Products Company, dated 10/04/2017, signed and sealed by Scott Hamilton,
P.E.

Carlos M. Utrera, P.E.

Product Control Examiner

NOA-No. 20-0922.32

Expiration Date: July 18, 2023

Approval Date: November 25, 2020

E - 3

Clopay Corporation

NOTICE OF ACCEPTANCE:

EVIDENCE SUBMITTED

3.EVIDENCE SUBMITTED UNDER PREVIOUS NOA # 18-0510.02

A.DRAWINGS
1.Drawing No. 104785, titled “2” Gallery EPS Doors 16’2”W”, sheets 1 through 3 of 3,
dated 01/10/2013, with revision 05 dated 07/18/2017, prepared by Clopay Building
Products Company, dated 04/27/2018, signed and sealed by Scott Hamilton, P.E.


B.

TESTS

1.

None.


C.

CALCULATIONS
1.None.


D.QUALITY ASSURANCE
1.

Miami-Dade Department of Regulatory and Economic Resources (RER).


E.MATERIAL CERTIFICATIONS
1.Notice of Acceptance No. 15-0915.08 issued to Sabic Innovative Plastic, US, LLC for
their “LEXAN® Polycarbonate Sheet Products” dated 12/10/15, expiring on 07/17/18.


F.STATEMENTS
1.Statement letter of code conformance to the 6th edition (2017) FBC issued by Clopay
Building Products Company, dated 04/27/2018, signed and sealed by Scott Hamilton,
P.E.
2.Statement letter of no financial interests issued by Clopay Building Products
Company, dated 04/27/2018, signed and sealed by Scott Hamilton, P.E.

Carlos M. Utrera, P.E.

Product Control Examiner

NOA-No. 20-0922.32

Expiration Date: July 18, 2023

Approval Date: November 25, 2020

E - 4

Clopay Corporation

NOTICE OF ACCEPTANCE:

EVIDENCE SUBMITTED

4.NEW EVIDENCE SUBMITTED

A.DRAWINGS
1.Drawing No. 104785, titled “2” Gallery EPS Doors 16’2”W”, sheets 1 through 3 of 3,
dated 01/10/2013, with revision 06 dated 08/28/2020, prepared by Clopay
Corporation, dated 09/10/2020, signed and sealed by Scott Hamilton, P.E.


B.TESTS
1.

None.


C.

CALCULATIONS
1.None.


D.QUALITY ASSURANCE
1.

Miami-Dade Department of Regulatory and Economic Resources (RER).


E.MATERIAL CERTIFICATIONS
1.

None.


F.STATEMENTS
1.Statement letters of code conformance to 6th Edition (2017) and 7th Edition (2020)
FBC, issued by Clopay Corporation, dated 09/15/2020, signed and sealed by Scott
Hamilton, P.E.
2.Certificate of amendment changing the company name from Clopay Building Products
Company, Inc. to Clopay Corporation, issued by the State of Delaware, dated
08/27/2019.

PRODUCT REVISED
as complying with the Florida
Building Code
NOA–No.

Expiration Date

By
Miami–Dade Product Control

07/18/2023

20–0922.32

PRODUCT REVISED
as complying with the Florida
Building Code
NOA–No.

Expiration Date

By
Miami–Dade Product Control

07/18/2023

20–0922.32

PRODUCT REVISED
as complying with the Florida
Building Code
NOA–No.

Expiration Date

By
Miami–Dade Product Control

07/18/2023

20–0922.32