Cisco RSE C2

Does not scale well in large networks

• EIGRP
• static routes
• default route
• CEF

What command would you enter on R1 in order to route packets to PC3?

• ip route 192.168.2.0 255.255.255.0 172.16.0.0
• ip route 192.168.2.0 255.255.255.0 s0/0/0
• ip route 172.16.3.0 255.255.255.0 192.168.2.0
• ip route 192.168.2.0 255.255.255.0 172.16.2.2

True or False: A fully specified static route includes both the exit interface and the next-hop

• True
• False

default administrative distance of a static route

• 0
• 1
• 5
• 90

What is the correct syntax of a floating static route?

• ip route 209.165.200.228 255.255.255.248 serial 0/0/0
• ip route 209.165.200.228 255.255.255.248 10.0.0.1 120
• ip route 0.0.0.0 0.0.0.0 serial 0/0/0
• ip route 172.16.0.0 255.248.0.0 10.0.0.1

What type of route allows a router to forward packets even though its routing table contains no specific route to the destination network?

• dynamic route
• default route
• destination route
• generic route

Which type of static route that is configured on a router uses only the exit interface?

• recursive static route
• directly connected static route
• fully specified static route
• default static route

Which command would be used on router A to configure a static route to direct traffic from LAN A that is destined for LAN C?

• ip route 192.168.4.0 255.255.255.0 192.168.5.2
• ip route 192.168.4.0 255.255.255.0 192.168.3.2
• ip route 192.168.5.0 255.255.255.0 192.168.3.2
• ip route 192.168.3.2 255.255.255.0 192.168.4.0

A network administrator has entered a static route to an Ethernet LAN that is connected to an adjacent router. However, the route is not shown in the routing table. Which command would the administrator use to verify that the exit interface is up?

• show ip interface brief
• show ip route
• show ip protocols
• tracert

Administrative distance of OSPF

• 90
• 110
• 120
• 255