Evaluation Kelas XII (Procedure Text) SMA PPG

Connecting JetFlash (flash disk) to a Computer

1. Plug the JetFlash directly into an available USB port on your desktop or notebook computer.

2. When the JetFlash is successfully connected to a computer, the JetFlash ‘s LED will light up. A Removable Disk drive* with a newly assigned drive letter indicating the JetFlash will appear in the My Computer window. In addition, a Removable Hardware icon and an icon Quick Menu (provided you setup JetFlash elite) will appear in the Windows System Tray

After the JetFlash is connected to the computer, you can start transferring data to the JetFlash Just drag and drop files or folders directly onto the Removable Disk icon that represents the JetFlash .

(Source: BSE, taken from: JetFlash manual)

1. What does the text tell us about?

• The steps to install the JetFlash .

• The steps to uninstall the JetFlash .

• The steps to install QuickMenu of the JetFlash.

• The steps to copy files and folders to the JetFlash.

Connecting JetFlash (flash disk) to a Computer

1. Plug the JetFlash directly into an available USB port on your desktop or notebook computer.

2. When the JetFlash is successfully connected to a computer, the JetFlash ‘s LED will light up. A Removable Disk drive* with a newly assigned drive letter indicating the JetFlash will appear in the My Computer window. In addition, a Removable Hardware icon and an icon Quick Menu (provided you setup JetFlash elite) will appear in the Windows System Tray

After the JetFlash is connected to the computer, you can start transferring data to the JetFlash Just drag and drop files or folders directly onto the Removable Disk icon that represents the JetFlash .

(Source: BSE, taken from: JetFlash manual)

10. Where do we plug the flash disk?

• Into the IDE port.

• Into the power slot.

• Into the USB port.

• Into the power outlet.

Connecting JetFlash (flash disk) to a Computer

1. Plug the JetFlash directly into an available USB port on your desktop or notebook computer.

2. When the JetFlash is successfully connected to a computer, the JetFlash ‘s LED will light up. A Removable Disk drive* with a newly assigned drive letter indicating the JetFlash will appear in the My Computer window. In addition, a Removable Hardware icon and an icon Quick Menu (provided you setup JetFlash elite) will appear in the Windows System Tray

After the JetFlash is connected to the computer, you can start transferring data to the JetFlash Just drag and drop files or folders directly onto the Removable Disk icon that represents the JetFlash .

(Source: BSE, taken from: JetFlash manual)

11. What indicates that the JetFlash is successfully connected to your computer?

• The JetFlash ‘s LED will light up.

• The computer is restarted automatically.

• The computer is removing the data to the JetFlash .

• The Auto Log In of the JetFlash is running.

Connecting JetFlash (flash disk) to a Computer

1. Plug the JetFlash directly into an available USB port on your desktop or notebook computer.

2. When the JetFlash is successfully connected to a computer, the JetFlash ‘s LED will light up. A Removable Disk drive* with a newly assigned drive letter indicating the JetFlash will appear in the My Computer window. In addition, a Removable Hardware icon and an icon Quick Menu (provided you setup JetFlash elite) will appear in the Windows System Tray

After the JetFlash is connected to the computer, you can start transferring data to the JetFlash Just drag and drop files or folders directly onto the Removable Disk icon that represents the JetFlash .

(Source: BSE, taken from: JetFlash manual)

12. In addition, a Removable Hardware icon and an icon Quick Menu (provided you setup JetFlash elite) will appear in the Windows System Tray.” The sentence implies …

• If the icons do not appear, you must reinstall the JetFlash elite.

• If the icons do not appear, you must check your hardware configuration.

• In some computers with different operating systems, the icons may not appear.

• You must install the icons so that the icons may appear in the Windows System Tray.

13. “In addition, a Removable Hardware icon and an icon QuickMenu (provided you setup JetFlash elite) will appear in the Windows System Tray.” The word 'icon' in the sentence is similar in meaning to ....

• port

• symbol

• cable

• drive

Text 4

How to Install CD-ROM

§ Turn off your computer and unplug power cord from power outlet.

§ Carefully remove the computer cover.

§ Set the Master/Slave jumper on the rear panel of drive.

§ (To get best results, we strongly suggest that you connect your device to the Secondary IDE port as the MASTER device.)

§ Connect the IDE cable to the drive.

§ Connect the 4-pole power cable to the drive.

§ Connect the audio cable (if applicable).

§ Carefully slide the drive into the empty bay and mount it. Then replace the computer cover.

§ Plug your computer back to power outlet and then turn the power on.

14.What should be done first before installing the CD-ROM?

• Remove the computer cover

• Unplug all other devices first

• Turn off the computer and unplug the power cable

• Turn the computer on before installing CD-ROM

Text 4

How to Install CD-ROM

§ Turn off your computer and unplug power cord from power outlet.

§ Carefully remove the computer cover.

§ Set the Master/Slave jumper on the rear panel of drive.

§ (To get best results, we strongly suggest that you connect your device to the Secondary IDE port as the MASTER device.)

§ Connect the IDE cable to the drive.

§ Connect the 4-pole power cable to the drive.

§ Connect the audio cable (if applicable).

§ Carefully slide the drive into the empty bay and mount it. Then replace the computer cover.

§ Plug your computer back to power outlet and then turn the power on.

14.What does the writer strongly recommend in order to get the best result of the CD-ROM installation?

• That we remove the computer cover first.

• That the computer should be turned off before installing CD-ROM.

• That the CD-ROM is set as Master device in the Secondary IDE.

• That CD-ROM is set as Master device in Primary IDE

Text 4

How to Install CD-ROM

§ Turn off your computer and unplug power cord from power outlet.

§ Carefully remove the computer cover.

§ Set the Master/Slave jumper on the rear panel of drive.

§ (To get best results, we strongly suggest that you connect your device to the Secondary IDE port as the MASTER device.)

§ Connect the IDE cable to the drive.

§ Connect the 4-pole power cable to the drive.

§ Connect the audio cable (if applicable).

§ Carefully slide the drive into the empty bay and mount it. Then replace the computer cover.

§ Plug your computer back to power outlet and then turn the power on.

14.What does the writer strongly recommend in order to get the best result of the CD-ROM installation?

• That we remove the computer cover first.

• That the computer should be turned off before installing CD-ROM.

• That the CD-ROM is set as Master device in the Secondary IDE.

• That CD-ROM is set as Master device in Primary IDE

Text 4

How to Install CD-ROM

§ Turn off your computer and unplug power cord from power outlet.

§ Carefully remove the computer cover.

§ Set the Master/Slave jumper on the rear panel of drive.

§ (To get best results, we strongly suggest that you connect your device to the Secondary IDE port as the MASTER device.)

§ Connect the IDE cable to the drive.

§ Connect the 4-pole power cable to the drive.

§ Connect the audio cable (if applicable).

§ Carefully slide the drive into the empty bay and mount it. Then replace the computer cover.

Plug your computer back to power outlet and then turn the power on

14.“Connect the audio cable (if applicable).” The sentence implies ….

a.

b.

c.

d.

• You may not turn the computer on before connecting the cable.

• Your CD-ROM may not work properly if you do not connect the cable.

• Reinstall the CD-ROM if you have not connected the cable.

• It is not necessary to connect the cable if it is not valid

14. Arrange the following sentences into a meaningful passage.

How to operate the microwave

1. Your food is ready to serve

2. First, open the microwave

3. Finally, remove the food carefully

4. After that close the microwave and set

cook time

5. Check periodically to ensure the food is well

cooked

6. Then place the food container inside the

microwave

7. Restart the microwave if additional cooking time

is required

• 6 – 4 – 2 – 7 – 1 – 5 – 3

• 6 – 4 – 2 – 1 – 7 – 5 – 3

• 2 – 6 – 4 – 7 – 5 – 3 – 1

• 2 – 6 – 4 – 5 – 7 – 3 – 1