IAE Power Tools, Saw, & Workshop Safety

The Drill needs to be held _____________________ so that the drill bit does not break.

• At a 45 degree angle

• Perpendicular to the project

• At a 90 degree angle

• None of the above

Before replacing parts such as bits, blades, or discs on any tool, you must _____.

• a. polish it with a fine steel wool
• b. recharge the tool's battery
• c. disconnect the power source
• d. inspect them for cracks

When using either the scroll saw or band saw …

• Feed the material slowly

• Force the material

• Neither

Always get the instructor’s permission before ______________________.

• Entering the workshop

• Using the equipment

• All the above

On the scroll saw, the hold down guide should …

• Touch the material

• ¼" above the material

• Neither

_____________ can be caught in belts, pulleys, and other moving parts of the machines.

• Loose clothing

• Long hair

• Jewelry

• All the above

When using any of the saws in the workshop, keep hands …

• Close to the cutting line

• 2” away from blade

• Neither

When using either the scroll or band saw, you should avoid…

• Making straight cuts

• Backing out of cuts

• Neither

It is critical to always wear ________________ & _________________ while working with saws in the workshop.

• Gloves & ear protection

• Safety Googles & Closed-toed Shoes

• Safety Googles & Gloves

• Gloves & Open-toed Shoes

Always tell the _____________ when a piece of equipment is not working properly or broken.

• Classmate

• Instructor

• Parent

• None of the above