CCNA2. part 1

Refer to the exhibit. Assuming that the routing tables are up to date and no ARP messages are needed, after a packet leaves H1, how many times is the L2 header rewritten in the path to H2?

• 1

• 2

• 3

• 4

Refer to the exhibit. Which highlighted value represents a specific destination network in the routing table?

• 0.0.0.0

• 10.16.100.128

• 10.16.100.2

• 110

Which type of static route is configured with a greater administrative distance to provide a backup route to a route learned from a dynamic routing protocol?

• floating static route

• default static route

• summary static route

• standard static route

Refer to the exhibit. Which route was configured as a static route to a specific network using the next-hop address?

• S 10.17.2.0/24 [1/0] via 10.16.2.2

• S 0.0.0.0/0 [1/0] via 10.16.2.2

• C 10.16.2.0/24 is directly connected, Serial0/0/0

• S 10.17.2.0/24 is directly connected, Serial 0/0/0

What network prefix and prefix-length combination is used to create a default static route that will match any IPv6 destination?

• :/128

• FFFF:/128

• ::/64

• ::/0

A router has used the OSPF protocol to learn a route to the 172.16.32.0/19 network. Which command will implement a backup floating static route to this network?

• ip route 172.16.0.0 255.255.240.0 S0/0/0 200

• ip route 172.16.32.0 255.255.224.0 S0/0/0 200

• ip route 172.16.0.0 255.255.224.0 S0/0/0 100

• ip route 172.16.32.0 255.255.0.0 S0/0/0 100

Refer to the exhibit. Currently router R1 uses an EIGRP route learned from Branch2 to reach the 10.10.0.0/16 network. Which floating static route would create a backup route to the 10.10.0.0/16 network in the event that the link between R1 and Branch2 goes down?

• ip route 10.10.0.0 255.255.0.0 Serial 00/0 100

• ip route 10.10.0.0 255.255.0.0 209.165.200.226 100

• ip route 10.10.0.0 255.255.0.0 209.165.200.225 100

• ip route 10.10.0.0 255.255.0.0 209.165.200.225 50

Which statement describes a route that has been learned dynamically?

• It is automatically updated and maintained by routing protocols.

• It is unaffected by changes in the topology of the network.

• It has an administrative distance of 1.

• It is identified by the prefix C in the routing table.

Compared with dynamic routes, what are two advantages of using static routes on a router? (Choose two.)

• They Improve network security

• They use fewer router resources

• They take less time to converge when the network topology changes

• They improve the efficiency of discovering neighboring networks.

To enable RIPv1 routing for a specific subnet, the configuration command network 172.16.64.32 was entered by the network administrator. What address, if any, appears in the running configuration file to identify this network?

• 172.16.64.32

• 172.16.64.0

• 172.16.0.0

• No address is displayed.