Refer to the exhibit. Based on the output that is shown, what type of NAT has been implemented?

PAT using an external interface

dynamic NAT with a pool of two public IP addresses

What is the purpose of the overload keyword in the ip nat inside source list 1 pool NAT_POOL overload command?

It allows many inside hosts to share one or a few inside global addresses.

It allows a pool of inside global addresses to be used by internal hosts.

It allows external hosts to initiate sessions with internal hosts.

It allows a list of internal hosts to communicate with a specific group of external hosts.

What two addresses are specified in a static NAT configuration?

the inside local and the inside global

the inside global and the outside local

the inside local and the outside global

the outside global and the outside local

Refer to the exhibit. The NAT configuration applied to the router is as follows: ERtr(config)# access-list 1 permit 10.0.0.0 0.255.255.255 ERtr(config)# ip nat pool corp 209.165.201.6 209.165.201.30 netmask 255.255.255.224 ERtr(config)# ip nat inside source list 1 pool corp overload ERtr(config)# ip nat inside source static 10.10.10.55 209.165.201.4 ERtr(config)# interface gigabitethernet 0/0 ERtr(config-if)# ip nat inside ERtr(config-if)# interface serial 0/0/0 ERtr(config-if)# ip nat outside Based on the configuration and the output shown, what can be determined about the NAT status within the organization?

Not enough information is given to determine if both static and dynamic NAT are working.

Static NAT is working, but dynamic NAT is not.

Dynamic NAT is working, but static NAT is not.

Refer to the exhibit. Which two statements are correct based on the output as shown in the exhibit? (Choose two.)

he output is the result of the show ip nat translations command.

The host with the address 209.165.200.235 will respond to requests by using a source address of 192.168.10.10.

The host with the address 209.165.200.235 will respond to requests by using a source address of 209.165.200.235.

Traffic with the destination address of a public web server will be sourced from the IP of 192.168.1.10.

The output is the result of the show ip nat statistics command.

Which situation describes data transmissions over a WAN connection?

An employee shares a database file with a co-worker who is located in a branch office on the other side of the city.

An employee prints a file through a networked printer that is located in another building.

A manager sends an email to all employees in the department with offices that are located in several buildings.

A network administrator in the office remotely accesses a web server that is located in the data center at the edge of the campus.

Which network scenario will require the use of a WAN?

Employees need to connect to the corporate email server through a VPN while traveling.

Employee workstations need to obtain dynamically assigned IP addresses.

Employees in the branch office need to share files with the headquarters office that is located in a separate building on the same campus network.

Employees need to access web pages that are hosted on the corporate web servers in the DMZ within their building.

Which circumstance would result in an enterprise deciding to implement a corporate WAN?

when its employees become distributed across many branch locations

when the network will span multiple buildings

when the number of employees exceeds the capacity of the LAN

when the enterprise decides to secure its corporate LAN

What is the function of the Hashed Message Authentication Code (HMAC) algorithm in setting up an IPsec VPN?

protects IPsec keys during session negotiation

creates a secure channel for key negotiation

Which VPN solution allows the use of a web browser to establish a secure, remote-access VPN tunnel to the ASA?

site-to-site using a preshared key

Which two types of VPNs are examples of enterprise-managed remote access VPNs? (Choose two.)

IPsec Virtual Tunnel Interface VPN

Which is a requirement of a site-to-site VPN?

It requires a VPN gateway at each end of the tunnel to encrypt and decrypt traffic.

It requires a client/server architecture.

It requires the placement of a VPN server at the edge of the company network.

It requires hosts to use VPN client software to encapsulate traffic.

What is the function of the Diffie-Hellman algorithm within the IPsec framework?

allows peers to exchange shared keys

provides strong data encryption

Refer to the exhibit. A network administrator is viewing the output from the command show ip nat translations . Which statement correctly describes the NAT translation that is occurring on router RT2?

The traffic from a source IPv4 address of 192.168.254.253 is being translated to 192.0.2.88 by means of static NAT.

The traffic from a source IPv4 address of 192.0.2.88 is being translated by router RT2 to reach a destination IPv4 address of 192.168.254.253.

The traffic from a source IPv4 address of 192.168.2.20 is being translated by router RT2 to reach a destination IPv4 address of 192.0.2.254.

The traffic from a source IPv4 public address that originates traffic on the internet would be able to reach private internal IPv4 addresses.

Which two statements about the relationship between LANs and WANs are true? (Choose two.)

WANs connect LANs at slower speed bandwidth than LANs connect their internal end devices.

WANs are typically operated through multiple ISPs, but LANs are typically operated by single organizations or individuals.

Both LANs and WANs connect end devices.

LANs connect multiple WANs together.

WANs must be publicly-owned, but LANs can be owned by either public or private entities.

Which statement describes an important characteristic of a site-to-site VPN?

It is ideally suited for use by mobile workers.

It requires using a VPN client on the host PC.

It is commonly implemented over dialup and cable modem networks.

How is "tunneling" accomplished in a VPN?

New headers from one or more VPN protocols encapsulate the original packets.

All packets between two hosts are assigned to a single physical medium to ensure that the packets are kept private.

Packets are disguised to look like other types of traffic so that they will be ignored by potential attackers.

A dedicated circuit is established between the source and destination devices for the duration of the connection.

Which statement describes a VPN?

VPNs use virtual connections to create a private network through a public network.

VPNs use dedicated physical connections to transfer data between remote users.

VPNs use logical connections to create public networks through the Internet.

VPNs use open source virtualization software to create the tunnel through the Internet.

Module 6-8 ENSA

Authored by Rigoberto CTA]

Life Skills

12th Grade

Used 29+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

61 questions

Show all answers

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Refer to the exhibit. What has to be done in order to complete the static NAT configuration on R1?

R1 should be configured with the command ip nat inside source static 209.165.200.1 192.168.11.11 .

R1 should be configured with the command ip nat inside source static 209.165.200.200 192.168.11.11 .

Interface S0/0/0 should be configured with the command ip nat outside .

Interface Fa0/0 should be configured with the command no ip nat inside .

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Refer to the exhibit. A network administrator has configured R2 for PAT. Why is the configuration incorrect?

The static NAT entry is missing.

NAT-POOL2 is bound to the wrong ACL.

The ACL does not define the list of addresses to be translated.

The overload keyword should not have been applied.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Refer to the exhibit. From the perspective of R1, the NAT router, which address is the inside global address?

192.168.0.1

192.168.0.10

209.165.200.225

209.165.200.254

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

244

255

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What is a disadvantage when both sides of a communication use PAT?

Host IPv4 addressing is complicated.

End-to-end IPv4 traceability is lost.

The flexibility of connections to the Internet is reduced.

The security of the communication is negatively impacted.

MULTIPLE SELECT QUESTION

30 sec • 1 pt

Refer to the exhibit. A network administrator has just configured address translation and is verifying the configuration. What three things can the administrator verify? (Choose three.)

Address translation is working.

Three addresses from the NAT pool are being used by hosts.

A standard access list numbered 1 was used as part of the configuration process.

Two types of NAT are enabled.

One port on the router is not participating in the address translation.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Refer to the exhibit. NAT is configured on RT1 and RT2. The PC is sending a request to the web server. What IPv4 address is the source IP address in the packet between RT2 and the web server?

192.0.2.2

172.16.1.10

203.0.113.10

172.16.1.254

209.165.200.245

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

57 questions

Chef's Workshop *Final Exam* Review

Quiz

•

12th Grade

57 questions

Managing Your Money Test Review

Quiz

•

12th Grade

60 questions

History of the Fez

Quiz

•

12th Grade - University

56 questions

3rd 9 weeks Test

Quiz

•

9th - 12th Grade

60 questions

Calif. drivers permit test

Quiz

•

10th Grade - Professi...

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

54 questions

Analyzing Line Graphs & Tables

Quiz

•

4th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

Discover more resources for Life Skills

20 questions

Investing

Quiz

•

9th - 12th Grade

20 questions

Career

Quiz

•

9th - 12th Grade

20 questions

Paying for College

Quiz

•

9th - 12th Grade

15 questions

SUPER BOWL FOOD TRIVIA

Quiz

•

9th - 12th Grade

20 questions

Types of Credit

Quiz

•

9th - 12th Grade

20 questions

Budgeting

Quiz

•

9th - 12th Grade

20 questions

Insurance

Quiz

•

9th - 12th Grade

20 questions

Managing Credit

Quiz

•

9th - 12th Grade

Module 6-8 ENSA

Refer to the exhibit. What has to be done in order to complete the static NAT configuration on R1?

Refer to the exhibit. A network administrator has configured R2 for PAT. Why is the configuration incorrect?

Refer to the exhibit. From the perspective of R1, the NAT router, which address is the inside global address?

What is a disadvantage when both sides of a communication use PAT?

Refer to the exhibit. A network administrator has just configured address translation and is verifying the configuration. What three things can the administrator verify? (Choose three.)

Refer to the exhibit. NAT is configured on RT1 and RT2. The PC is sending a request to the web server. What IPv4 address is the source IP address in the packet between RT2 and the web server?

Refer to the exhibit. Based on the output that is shown, what type of NAT has been implemented?

In NAT terms, what address type refers to the globally routable IPv4 address of a destination host on the Internet?

Refer to the exhibit. From the perspective of users behind the NAT router, what type of NAT address is 209.165.201.1?

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Life Skills