ELEMENTS IN PROCEDURES

Burnt toast, chunks of crumpet stuck in the grill or excess crumbs can cause dangerous carbon and become a fire hazard. Prevention is key and can be achieved in minutes:

1. Unplug the toaster and make sure it feels cool to touch.

2. Cover a pencil with paper towel, and work the pencil in between the hot irons to remove any lodged debris. Replace the towel if it starts to tear.

3. Simply pull out the crumb drawer and empty the contents. Then wipe clean before reinstalling. For your information, there is a tray in all toasters. Making easy to discard excess waste, which is usually located on the bottom of the toaster.

4. Use the hair dryer (set to cool air) to blow through the toaster-blasting out any remaining crumbs. Best to do this one outside or over the sink.

5. Give the outside some shimmer and shine. Cut half a lemon and rub a little salt across the top which will act as a light abrasive. Swirl the lemon gently over the external surface, then wipe dry with a paper towel.

6. Dab some vinegar onto microfiber cloth then polish the surface, revealing and instant shine especially on silver features.

1. What is the text about?

• A. Instructions to treat a toaster well.

• B. Manual to use a toaster properly.

• C. Effective ways to clean toaster.

• D. Description of toaster.

Burnt toast, chunks of crumpet stuck in the grill or excess crumbs can cause dangerous carbon and become a fire hazard. Prevention is key and can be achieved in minutes:

1. Unplug the toaster and make sure it feels cool to touch.

2. Cover a pencil with paper towel, and work the pencil in between the hot irons to remove any lodged debris. Replace the towel if it starts to tear.

3. Simply pull out the crumb drawer and empty the contents. Then wipe clean before reinstalling. For your information, there is a tray in all toasters. Making easy to discard excess waste, which is usually located on the bottom of the toaster.

4. Use the hair dryer (set to cool air) to blow through the toaster-blasting out any remaining crumbs. Best to do this one outside or over the sink.

5. Give the outside some shimmer and shine. Cut half a lemon and rub a little salt across the top which will act as a light abrasive. Swirl the lemon gently over the external surface, then wipe dry with a paper towel.

6. Dab some vinegar onto microfiber cloth then polish the surface, revealing and instant shine especially on silver features.

2. What should we use to make a toaster shiny?

• A. A lemon.

• B. Vinegar.

• C. A paper towel.

• D. Salt and a lemon.

3. “…making it super easy to discard excess waste…” The underlined word is closest meaning to …

• A. Repel

• B. Collect

• C. Absorb

• D. Remove

Raisa : Hi, Rima. What are you doing?

Rima : I’m trying to apply this application. Can you help me?

Raisa : Sure. Firstly, open the application and key in your pick-up and drop-off locations to get your estimated fare. Secondly, get a driver. The nearest available driver will find you soon. The application will track your driver and let you know your driver’s location in real-time.Thirdly, share your ride with your loved ones or your family to ensure extra safety. You will feel more comfortable if your family or friends know where you are.

Rima : Thank You.

Raisa : My pleasure.

4. What is the topic of the dialogue above?

• A. How to install an ojek-online application

• B. How to be an ojek-online rider or driver

• C. How to go safely by ordering ojek-online vehicle

• D. How to ensure extra safety in travelling.

Printer Set Up Procedure

Use the following procedure to set up the printer.

1. Select a suitable location for your printer.

2. Verify the items that come with the printer.

3. Take the printer out of its box, and then remove the protective materials and adhesive tape.

4. Install the toner (print cartridge) in the printer.

5. Load paper in the standard paper feed tray.

6. Turn the printer power on.

7. Select the language used on the display.

8. Print a test page.

9. Connect the printer to your network.

10. Configure the printer's network settings.

11. If you are using a Type 2 model, install the ELP-NX card.

12. Install the printer driver.

(http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001039/0001039357/view/hardware/unv/0022.html/)

5. . “. . . remove the protective materials and adhesive tape. . .” The underlined word can be replaced with . . . .

• A. Sticking

• B. Loose

• C. Bigger

• D. Hard

Printer Set Up Procedure

Use the following procedure to set up the printer.

1. Select a suitable location for your printer.

2. Verify the items that come with the printer.

3. Take the printer out of its box, and then remove the protective materials and adhesive tape.

4. Install the toner (print cartridge) in the printer.

5. Load paper in the standard paper feed tray.

6. Turn the printer power on.

7. Select the language used on the display.

8. Print a test page.

9. Connect the printer to your network.

10. Configure the printer's network settings.

11. If you are using a Type 2 model, install the ELP-NX card.

12. Install the printer driver.

(http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001039/0001039357/view/hardware/unv/0022.html/)

6. What is being explained in the text?

• A. How to build printer

• B. How to use printer

• C. How to sell printer

• D. How to buy printer

Printer Set Up Procedure

Use the following procedure to set up the printer.

1. Select a suitable location for your printer.

2. Verify the items that come with the printer.

3. Take the printer out of its box, and then remove the protective materials and adhesive tape.

4. Install the toner (print cartridge) in the printer.

5. Load paper in the standard paper feed tray.

6. Turn the printer power on.

7. Select the language used on the display.

8. Print a test page.

9. Connect the printer to your network.

10. Configure the printer's network settings.

11. If you are using a Type 2 model, install the ELP-NX card.

12. Install the printer driver.

(http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001039/0001039357/view/hardware/unv/0022.html/)

7.Who is probably the text profitable for?

• A. Printer user

• B. Printer seller

• C. Printer sales girl

• D. Printer repairer

Boil the water First. Second, take two spoons of coffee and two spoons of sugar. Put them into a glass. Next, pour the hot water into a glass. Then, stir it gently. Finally, your coffee is ready to drink.

(http://britishcourse.com/22-contoh-procedure-text-sederhana.php)

8. “Then, stir it gently.” The underlined word has similar meaning to . . . .

Boil the water First. Second, take two spoons of coffee and two spoons of sugar. Put them into a glass. Next, pour the hot water into a glass. Then, stir it gently. Finally, your coffee is ready to drink.

(http://britishcourse.com/22-contoh-procedure-text-sederhana.php)

9. Put them into a glass.” What does ‘them’ refer to . . . .

Boil the water First. Second, take two spoons of coffee and two spoons of sugar. Put them into a glass. Next, pour the hot water into a glass. Then, stir it gently. Finally, your coffee is ready to drink.

(http://britishcourse.com/22-contoh-procedure-text-sederhana.php)

10. “Then, stir it gently.” From the sentence, what tools is used?