Test Exam

Which option shows a correctly configured IPv4 default static route?

• ip route 0.0.0.0 255.255.255.0 S0/0/0

• ip route 0.0.0.0 0.0.0.0 S0/0/0

• ip route 0.0.0.0 255.255.255.255 S0/0/0

• ip route 0.0.0.0 255.0.0.0 S0/0/0

What will router R1 do with a packet that has a destination IPv6 address of 2001:db8:cafe:5::1?

• forward the packet out GigabitEthernet0/0

• drop the packet

• forward the packet out GigabitEthernet0/1

• forward the packet out Serial0/0/0

Which static route command can be entered on R1 to forward traffic to the LAN connected to R2?

• ipv6 route 2001:db8:12:10::/64 S0/0/0

• ipv6 route 2001:db8:12:10::/64 S0/0/1 fe80::2

• ipv6 route 2001:db8:12:10::/64 S0/0/0 fe80::2

• ipv6 route 2001:db8:12:10::/64 S0/0/1 2001:db8:12:10::1

Etat du port : administratively down

• disabled

• Layer 1 problem

• Layer 2 problem

• operational

Etat du port : down / down

• disabled

• Layer 1 problem

• Layer 2 problem

• operational

Etat du port : up / down

• disabled

• Layer 1 problem

• Layer 2 problem

• operational

Etat du port : up / up

• disabled

• Layer 1 problem

• Layer 2 problem

• operational

How is a frame sent from PCA forwarded to PCC if the MAC address table on switch SW1 is empty?

• SW1 forwards the frame directly to SW2. SW2 floods the frame to all ports connected to SW2, excluding the port through which the frame entered the switch.

• SW1 floods the frame on all ports on the switch, excluding the interconnected port to switch SW2 and the port through which the frame entered the switch.

• SW1 floods the frame on all ports on SW1, excluding the port through which the frame entered the switch.

• SW1 drops the frame because it does not know the destination MAC address.

A network administrator has connected two switches together using EtherChannel technology. If STP is running, what will be the end result?

• STP will block one of the redundant links.

• The switches will load balance and utilize both EtherChannels to forward packets.

• The resulting loop will create a broadcast storm.

• Both port channels will shutdown.

What is a secure configuration option for remote access to a network device?

• Configure an ACL and apply it to the VTY lines.

• Configure 802.1x.

• Configure SSH.

• Configure Telnet.