Ag Mech II - Unit 3.00 Safety Test Reveiw

When one uses the electric drill press to drill holes in flat or rectangular steel, the steel should be held in place by using:

• both hands

• vise-grip pliers

• a drill-press vise

• a machinist's vise

The minimum number of hacksaw teeth that should be cutting the metal at one time is:

• 1.

• 3.

• 6.

• 8.

What should a person wear to prevent eye burn from arc welding?

• chipping goggles with side shields

• safety glasses with side shields

• helmet with #10 shade lens

• face shield with headband

Red is the color used to show the location of:

• fire extinguishers.

• first aid kits.

• work zones.

• trach cans.

When Sue is using a file, she should:

• apply pressure on the forward stroke.

• apply pressure on the back stroke.

• apply pressure on both strokes.

• avoid applying pressure.

Which measuring tool is best to determine the space between two parts, such as piston ring gaps or valve gaps?

• feeler gauge

• flexible tape

• wire gauge

• dividers

A cold chisel is used to cut:

• ice.

• metal,

• plastic.

• wood.

What tool is used to make a starting dent before drilling a hole in metal?

• center punch

• pin punch

• nail set

• nail

If a welder wants to mark metal so that there will be a scratch or permanent mark, he/she should use:

• a pencil.

• an awl.

• chalk.

• soapstone.

To make a square mark on a board, the handle of a square has to be held:

• with the left hand.

• with the right hand.

• firmly against the board.

• loosely against the board.