L1MV27 Lubrication

Which part of the lubrication system removes unwanted impurities?

• Filter

• Galleries

• Sump

• Pressure relief valve

When the engine is turned off where does most of the oil collect?

• In the galleries

• In the cylinders

• In the sump

• In the filter

Which type of oil would be better for high temperatures?

• High viscosity

• Low viscosity

What is between the sump and the bottom of the cylinder block?

• Oil

• A gasket

• Oil pump

• Drain plug

What is used to measure the level of oil in the sump?

• Oil Filter

• Dipstick

• Oil pan

• Oil pump

What is the purpose of the splines on the crankshaft?

• To make sure the oil only flows in one direction

• To keep the oil clean

• To drive the pump inner gear

• To seal the pump unit

If the top gear of a gear oil pump turns in a clockwise direction, in which direction does the other gear turn?

• Clockwise

• Counterclockwise

Where does the oil enter an oil filter?

• Through the bottom tube

• Through the feed holes

• Through the centre tube

• Through the paper

Where does the oil filter housing connect to?

• To the cylinder block

• To the dipstick

• To the radiator

• To the oil pump

If an oil cooler heat exchanger is fitted, where would its hoses normally directly connect to?

• The cylinder head

• The radiator

• The galleries

• The oil filter assembly