IDENTIFICATION Electrical Tools

This is used for griping, holding, cutting electrical wires and cables and even small nails. Usually used by linemen in doing heavy tasks.



This is used for removing burrs on newly cut conduits. It is available in different sizes.

• Push-pull rule

• Micrometer

• Gimlet

• Reamer

Used to measure length, width, and thickness of short flat objects and to draw straight lines.

• Push-pull rule

• Wire Gauge

• Foot rule

• Micrometer

This type of pliers is used for cutting fine, medium, and big and cable.

A tool primarily used for driving nails into, or pulling nails from, some other object.

• Ball-Pen Hammer

• Mallet

• Claw Hammer

• Rubber Head Hammer

Is a simple tool used to drive bolts and screws with hexagonal sockets in their heads. The tool is usually formed of a single piece of hexagonal rod of hard steel, with blunt ends that are meant to fit snugly into the screw's socket, bent in an "L" shape with unequal arms.

These are used to loosen or tighten screws with slotted heads and come in various sizes and shapes.

• Phillip Screw Driver

• Screw Drivers

• Hex Key

• Allen Key

• Stubby screw driver

• Phillip screw driver

• This is used by linemen to remove insulation of wire and cables in low and high voltage transmission lines.

• This is a tool used for stripping or removing the insulation of connecting wires ranging from gauge #10 to gauge #16.

• This tool is used for cutting pipes/conduit and cables. It is also used for cutting big conductors.

• This is a wire like boring tool used in making initial holes for split knob screws.

Used to measure the length of an object in centimeters and inches. This is also used to measure heights for switches and outlets.

• 
• 
• 
•