Scroll saw and spindle sander quiz

"Never sand very ______ pieces with the spindle sander." Fill in the blank.

• Big

• Small

After turning on the sander when can you start sanding?

• Right away

• When it gets up to full speed

• Very little speed at all

• When its at medium speed

Before turning on the sander what do you need to make sure of?

• Get materials ready

• Make sure you have a pencil handy

• Get your bench all clear and clean

• Make sure there are no scraps between the spindle and the table

When you are finished with the spindle sander, make sure to clean the sander with an _______________ block

• Steel

• Copper

• Abrasive (Rubber)

• Plastic

How far away should your fingers stay from the sander?

• 5 inches

• 1 inch

• 10 inches

• 12 inches

This photo is what machine?

• Drill Press

• Spindle sander

• Band saw

• Scroll Saw

Check to be sure the blade is installed correctly on the scroll saw. The teeth should point _________.

• upward

• downward

• to the left

• to the right

Don't ____________________. Twisting the blade or putting too much pressure on it will break it.

• adjust the tension

• adjust the height

• move the material

• force the cut

Keep your fingers away from the area ________ of the blade. Keep your fingers, hands and arms at least ___________ away from the blade.

• to the right; two inches

• in back; one inch

• in front; two inches

• in back, two inches

What is the proper way to dress when operating the scroll saw?

• remove jewelry

• secure loose clothing

• tie back long hair

• All the above