NAS Part 2 - Class B, C, and D

ADS-B Out is required in which type of airspace?

HINT: This is also within the Mode C veil.

• In Class E airspace below 10,000 MSL that is directly above Class D airspace.

• In Class E airspace below a Class C shelf area.

• Uncontrolled airspace within 30 miles of a Class B airport.

(Refer to Figure 20, area 1.)

What minimum radio equipment is required to land and take off at Norfolk International?

• Mode C transponder and two-way radio.

• Mode C transponder and omnireceiver.

• Mode C transponder, omnireceiver, and DME.

Tags

NGSS.HS-PS2-5

The vertical limit of Class C airspace is generally

• 4,000 feet MSL.

• 4,000 feet AGL.

• 2,500 feet AGL.

What is the ten-mile wide ring that surrounds Class C airspace called?

• The contact area.

• The outer area.

• The shelf area.

What is the radius of the Class C outer area?

• 20 NM.

• 10 NM.

• 30 NM.

Unless otherwise authorized, two-way radio communications with Air Traffic Control are required for landings or takeoffs

• at all tower controlled airports only when weather conditions are less than VFR.

• at all tower controlled airports within Class D airspace only when weather conditions are less than VFR.

• at all tower controlled airports regardless of weather conditions.

(Refer to Fig. 70, area 3.)

How high does the Class D extend at Hayward Executive (HWD) airport?

• Up to, but not including, 1,500 feet AGL.

• Up to, but not including, 1,500 feet MSL.

• 1,500 feet MSL.

The vertical limit of Class C airspace above the primary airport is normally

• 4,000 feet AGL.

• 3,000 feet AGL.

• 1,200 feet AGL.

(Refer to Fig. 25, Area 3)

At what altitude does the Class B start over the Dallas Executive Airport (RBD)?

• 2,999 feet MSL.

• 3,001 feet MSL.

• 3,000 feet MSL.

(Refer to Fig. 25, Area 3.)

At what altitude does the Class B start over the Arlington (GKY) airport?

• 2,000 feet AGL.

• 2,000 feet MSL.

• 3,000 feet MSL.