PROCEDURE TEXT (MANUAL & TIPS)

How to use a hand mixer

1. Make sure that the mixer is unplugged and the speed is on low before you insert the beaters.

2. Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

3. Slowly use the speed control button to set your desired speed. Start with 1 and then slowly increase it to your desired speed.

4. When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

5. Unplug the mixer by pulling the cable off from the socket.

6. Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

What is the goal of the text?

• How to use a hand mixer

• How to use a microwave

• How to use a rice cooker

• How to use a blender

How to use a hand mixer

1. Make sure that the mixer is unplugged and the speed is on low before you insert the beaters.

2. Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

3. Slowly use the speed control button to set your desired speed. Start with 1 and then slowly increase it to your desired speed.

4. When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

5. Unplug the mixer by pulling the cable off from the socket.

6. Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

What is the fifth step on the text above?

• Plug the mixer ...

• Unplug the mixer ...

• Eject the beater ...

• Turn the speed down ...

The best arrangement of the steps below are ...

(1) Don’t forget to wash hands after cleaning the working area.

(2) Press the button to start heating the food.

(3) Finally, take out the food and enjoy it.

(4) Don’t forget to decide how long it will heat the food.

(5) Wait for the beep sound. It indicates the cooking process is done.

(6) Put the food into the microwave.

• 2-6-4-5-3-1

• 6-2-3-1-4-5

• 6-2-5-4-3-1

• 6-2-4-5-3-1

The suitable step for the picture is ...

• Put all of the ingredients into the blender cup

• Place the blender cup on the blender machine

• Insert the plug into the electricity socket

• Open the blender and pour the mixture into a glass or bowl

........ the blender by pressing the speed button, you can start from the medium speed.

The best instruction to fill the blank is ...

• End

• Start

• Pull

• Push

How to Clean an LCD Screen

1. Shake up the detergent and put it 15-20 cm away from the LCD screen.

2. Spray on the LCD screen surface directly.

3. Cleanse gently using the fabric cleanser or brush.

You can also do the following steps:

1. Spray the detergent on the fabric cleanser.

2. Clean the LCD screen surface to make it as bright as a new one.

What is the purpose of the text above?

• To describe about how to clean an LCD screen.

• To describe about how to spray the detergent.

• To inform about an LCD screen.

• To inform about the fabric cleanser or brush.