Ag Mech 1 - 3.02 (Part 3)

What portable power tool is used to make round holes through wood or metal?

• drill

• grinder

• miter saw

• sander

Why does a heavy-duty screwdriver have a square shank?

• to allow a wrench to be used to help remove large screws

• to fit in the chuck of a portable electric drill

• to reach in difficult places

• to provide insulation from electrical shock

The type of handsaw used to cut wood with the grain is a:

• combination saw.

• coping saw.

• hand crosscut saw.

• hand ripsaw.

When a try square is used to mark a board, the:

• blade should be held firmly against the edge of the board.

• handle should be held firmly against the center of the board.

• handle should be held firmly against the edge of the board.

• handle should be held loosely against the edge of the board.

One should avoid using the miter gauge and the rip fence on a band saw at the same time because the:

• angle will be incorrect.

• blade will bend.

• cut will be uneven.

• wood will bind.

The saw used to cut angles is the:

• hacksaw.

• hand crosscut saw.

• hand ripsaw.

• miter saw.

Which saw is used to cut across the grain of wood?

• coping saw

• hacksaw

• hand crosscut saw

• hand ripsaw

If a welder wants to mark metal so that there will be a scratch or permanent mark, he/she should use:

• an awl.

• a pencil.

• chalk.

• soapstone.

A try square is used to mark:

• 15° angles.

• 30° angles.

• 90° angles.

• curves.

The tool used for ripping and prying wood is the:

• half ratchet.

• rubber mallet.

• sledgehammer.

• wrecking bar.