Ag Mech 1 - 3.02 (Part 4)

Which hammer should be used to remove wood from a building?

• ball-peen hammer

• half hatchet

• nail hammer

• ripping hammer

If Josh is at a location without electrical power, what saw should he use to cut a board across the grain of the wood?

• circular saw

• hand crosscut saw

• hand ripsaw

• saber saw

Most tools used for measuring wood are divided into:

• 2 parts per foot.

• 4 parts per foot.

• 8 parts per inch.

• 16 parts per inch.

When unused, a portable belt sander should be laid:

• on its side.

• on the belt.

• on the handle.

• upside down.

Where should the bottom saw teeth point on a portable circular saw blade used to cut wood?

• toward the rip fence

• toward the center of the blade

• toward the front of the saw

• toward the rear of the saw

Lee used one tool as a plumb, depth gauge, inside and outside try square, level, miter square, and marking gauge. What tool did he use?

• combination square

• level

• plumb bob

• try square

When using a nail hammer, the user should hold the handle:

• halfway up the handle.

• near the end of the handle.

• near the hammer claws.

• near the hammer head.

What portable power tool is used to smooth wood surfaces?

• circular saw

• drill

• miter saw

• sander

What method used to fasten wood is quick but is also the weakest method?

• biscuit joints

• bolts

• nails

• screws

What portable power tool is used to make straight cuts in wood?

• circular saw

• cordless drill

• hacksaw

• metal shears