Procedure Text - XII TB

How to use a hand mixer

1. Make sure that the mixer is unplugged and the speed is on low before you insert the beaters.

2. Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

3. Slowly use the speed control button to set your desired speed. Start with 1 and then slowly increase it to your desired speed.

4. When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

5. Unplug the mixer by pulling the cable off from the socket.

6. Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

What is the goal of the text?

How to use a hand mixer

1. Make sure that the mixer is unplugged and the speed is on low before you insert the beaters.

2. Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

3. Slowly use the speed control button to set your desired speed. Start with 1 and then slowly increase it to your desired speed.

4. When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

5. Unplug the mixer by pulling the cable off from the socket.

6. Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

What is the fifth step on the text above?

How to use a hand mixer

1. Make sure that the mixer is unplugged and the speed is on low before you insert the beaters.

2. Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

3. Slowly use the speed control button to set your desired speed. Start with 1 and then slowly increase it to your desired speed.

4. When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

5. Unplug the mixer by pulling the cable off from the socket.

6. Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

" ...... slowly increase it to your desired speed". What is the antonym of slowly?

How to use a hand mixer

1. Make sure that the mixer is unplugged and the speed is on low before you insert the beaters.

2. Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

3. Slowly use the speed control button to set your desired speed. Start with 1 and then slowly increase it to your desired speed.

4. When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

5. Unplug the mixer by pulling the cable off from the socket.

6. Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

What should you do before unplug the mixer?

1. Insert a slice of bread into each toaster slot.

2. Choose the toasting level, usually it is from the lightest to the darkest. This will allow you to choose how dark the toast to be.

3. Wait until the toasting process finished, usually the process only take a minute.

4. Pick the bread when the toasting process is finished and the bread pops up from the toaster slot. Then put it on a plate.

5. Pour some sugar on the bread while it is still warm or put some butter on it.

6. The toasted bread is ready.

The best goal for the text above is ....

1. Insert a slice of bread into each toaster slot.

2. Choose the toasting level, usually it is from the lightest to the darkest. This will allow you to choose how dark the toast to be.

3. Wait until the toasting process finished, usually the process only take a minute.

4. Pick the bread when the toasting process is finished and the bread pops up from the toaster slot. Then put it on a plate.

5. Pour some sugar on the bread while it is still warm or put some butter on it.

6. The toasted bread is ready.

"Pick the bread when the toasting process ..... ". The underlined word can be replaced by .....

The suitable step for the picture is ....

........ the blender by pressing the speed button, you can start from the medium speed.

The best instruction to fill the blank is ....

The purpose of procedure text is ....

The correct arrangement of generic structures in procedure text are ....