Nokia Subcontractor-22

You are in optimizing 1 new site and 4G Payload suddenly increase and impact to your CSSR KPI, what will you NOT do immediately?

• Check if any promo campaign to up the sales
• Check your validity of your measurement if any double counting
• Payload Increase is good, so make justification for CSSR KPI
• Check if any site surrounding site if shutdown

Which Global NPO community contains network planning and optimization guidance material grouped per technology or product?

• Services Community
• Radio community Wiki
• NPO Modular Working Items Wiki
• NPO Services Wiki

What statement about Uplink Power control is NOT true

• UL power control changes may impact UL RSSI and SINR for PUSCH
• UL power control is responsible for setting the power of the PHICH
• UE is transparent to the UL power control algorithm
• UL power control is important for the correct MSG3 reception

What is the capacity of one time slot in TRX?

• 32Kbps
• 16Kbps
• 64Kbps
• 8Kbps

Iu-B is the interface between

• NodeB-NodeB
• RNC-SGSN
• RNC-RNC
• NodeB-RNC

How to improved DL Throughput, except

• Single Tx – MIMO
• MIMO 2x2 -> 2x4
• MIMO 2x2 à 4x4
• MIMO 2x4 à 4x2

Is it possible to plot throughput with a planning tool capable of only path loss based calculations?

• 1. No, it is only possible with Monte Carlo simulations
• 2. Yes, if the tool can calculate path loss and SINR (for static load) and MAPL (from link budget) is available for different throughputs
• 1 and 3 True
• 3. No, it is not possible based on only path loss calculations

What is the meaning of the cell capacity results in Nokia Dimensioning tools ?

• 1. cell capacity recalculated from the system simulation result based on assumptions of many active user
• 2. it means maximum user data rate
• 3. it means maximum cell data rate possible
• 1,2,3 True

Which is the most important and effective method to improve the network performance?

• 1. Parameter optimization
• 2. Power and handover optimization
• 3. Physical RF optimization.
• 1,2,3 True

How are time synchronization problems in the UL Physical Random Access channel (PRACH) solved?

• 1.By changing PCI on the serving cell
• 2. By tuning cell individual Offset on the neighboring cell
• 3. By introducing a guard time
• 1,2,3 True