Part 107 Airspace Review

(Refer to Figure 22, area 3.) Determine the approximate latitude and longitude of Shoshone County Airport.

• 47°02'N - 116°11'W.

• 47°33'N - 116°11'W.

• 47°32'N - 116°41'W.

(Refer to Figure 20, area 4.) A small UA is being launched 2 NM northeast of the town of Hertford. What is the height of the highest obstacle?

• 399 feet MSL.

• 500 feet MSL.

• 500 feet AGL.

(Refer to Figure 23.) The flag symbols at Statesboro Bulloch County Airport, Claxton-Evans County Airport, and Ridgeland Airport are

• outer boundaries of Savannah Class C airspace.

• airports with special traffic patterns.

• visual checkpoints to identify position for initial callup prior to entering Savannah Class C airspace.

(Refer to Figure 25, area 7.) The airspace overlying McKinney (TKI) is controlled from the surface to

• 2,900 feet MSL.

• 2,500 feet MSL.

• 700 feet AGL.

(Refer to Figure 78.) What class of airspace is associated with SIOUX GATEWAY/COL DAY (SUX) Airport?

• Class B airspace.

• Class C airspace.

• Class D airspace.

(Refer to Figure 21.) What airport is located approximately 47 (degrees) 40 (minutes) N latitude and 101 (degrees) 26 (minutes) W longitude?

• Mercer County Regional Airport.

• Semshenko Airport.

• Garrison Airport.

Flight through a restricted area should not be accomplished unless the remote pilot has

• filed an IFR flight plan.

• received prior authorization from the controlling agency.

• received prior permission from the commanding officer of the nearest military base.

(Refer to Figure 25, area 4.) The floor of Class B airspace overlying Hicks Airport (T67) north-northwest of Fort Worth Meacham Field is

• at the surface.

• 3,200 feet MSL.

• 4,000 feet MSL.

(Refer to Figure 20, area 3.) Determine the approximate latitude and longitude of Currituck County Airport.

• 36°24'N - 76°01'W.

• 36°48'N - 76°01'W.

• 47°24'N - 75°58'W.

According to 14 CFR part 107 the remote pilot in command (PIC) of a small unmanned aircraft planning to operate within Class C airspace

• must use a visual observer.

• is required to file a flight plan

• is required to receive ATC authorization.