iCEV Small Engine Technology: Troubleshooting, Repair, Service &

Which of the following is recommended for replacement upon major engine service?

• Crankcase and closure plate seals

• Camshaft

• Flywheel

• Ignition module

Which of the following describes Automatic Compression Release (ACR)?

• Increases compression, making manual starting safer and easier

• Decreases compression, making manual starting safer and easier

• Eliminates compression, making manual starting safer and easier

• Eliminates compression, making manual starting dangerous and difficult

Which of the following is a symptom of a faulty valve?

• Broken Flywheel

• Loss of Power

• Damaged crankcase

• Low fuel consumption

The spark plug electrode gap should be set to which of the following?

• 0.74mm

• 0.75mm

• 0.76mm

• 0.77mm

In which of the following scenarios should the crankshaft be replaced?

• Wear limits are exceeded

• Ignition is not taking place

• The engine is more than 10-years-old

• Upon major engine service

Which of the following should be the first step done before taking measurements of engine components?

• Make sure the engine is functioning properly

• Ensure all surfaces are cleaned

• Remove the closure plate

• Make sure the electrode gap is set to 0.74 mm

Which of the following is required before cleaning the carburetor in a solution or sonic cleaning tank?

• Assembly of the carburetor

• Disassembly of the carburetor

• Ensure all valves are closed

• Use a rag and clean all parts

When cleaning engine parts, which of the following should always be worn?

• Face shield and safety glasses

• Safety glasses only

• Chemical resistant gloves and safety glasses

• Chemical resistant gloves only

In the presentation, what was used to dry the carburetor components after cleaning?

• Compressed air

• Fan

• The Sun

• Air Dry

To repair the recoil assembly, a temporary slip knot should be tied about how many inches from the free end of the rope?

• 9 inches

• 10 inches

• 11 inches

• 12 inches