Remedial

Burning a CD allows you to take music from one CD and transfer it onto another CD. This process is possible with any computer that has a CD driver, but it is easier on a computer that can run two CDs at once. Either way, you can copy all your music from one CD to the next. Here is how to copy from one CD to another, using one and two CD drivers.

Instructions Burning with two CD Trays :

1.    Insert the CD from which you want to burn music into your computer’s CD tray. Insert a blank CD into your computer’s second CD tray.

2.    Open windows media player and wait for it to recognize the CD.

3.    Click the “burn” option at the top of Windows Media Player. Drag the songs you want from the list of your songs into the area on the right labeled “Burn List”.

4.    Choose the blank CD onto which you want to burn your song. This can be done at the top of the Burn List Menu.

5.    Click the “Start Burn” button when you have all the song you want for the CD added to the Burn List. Wait for your computer to finish the CD, then take both of the CDs out.

What is the topic of the text?

• Running two CDs.

• Opening Media Player.

• Copying a compact disc.

• Choosing the blank CD.

• Inserting the CD into computer.

Burning a CD allows you to take music from one CD and transfer it onto another CD. This process is possible with any computer that has a CD driver, but it is easier on a computer that can run two CDs at once. Either way, you can copy all your music from one CD to the next. Here is how to copy from one CD to another, using one and two CD drivers.

Instructions Burning with two CD Trays :

1.    Insert the CD from which you want to burn music into your computer’s CD tray. Insert a blank CD into your computer’s second CD tray.

2.    Open windows media player and wait for it to recognize the CD.

3.    Click the “burn” option at the top of Windows Media Player. Drag the songs you want from the list of your songs into the area on the right labeled “Burn List”.

4.    Choose the blank CD onto which you want to burn your song. This can be done at the top of the Burn List Menu.

5.    Click the “Start Burn” button when you have all the song you want for the CD added to the Burn List. Wait for your computer to finish the CD, then take both of the CDs out.

What should we do after click the “burn” option at the top of Windows Media Player?

• Choose the blank CD onto which you want to burn your song

• Open windows media player and wait for it to recognize the CD.

• Wait for your computer to finish the CD, then take both CDs out.

• Click the “Start Burn” button when you have all the songs you want from the CD.

• Drag the songs from the list of Songs

Burning a CD allows you to take music from one CD and transfer it onto another CD. This process is possible with any computer that has a CD driver, but it is easier on a computer that can run two CDs at once. Either way, you can copy all your music from one CD to the next. Here is how to copy from one CD to another, using one and two CD drivers.

Instructions Burning with two CD Trays :

1.    Insert the CD from which you want to burn music into your computer’s CD tray. Insert a blank CD into your computer’s second CD tray.

2.    Open windows media player and wait for it to recognize the CD.

3.    Click the “burn” option at the top of Windows Media Player. Drag the songs you want from the list of your songs into the area on the right labeled “Burn List”.

4.    Choose the blank CD onto which you want to burn your song. This can be done at the top of the Burn List Menu.

5.    Click the “Start Burn” button when you have all the song you want for the CD added to the Burn List. Wait for your computer to finish the CD, then take both of the CDs out.

What should we do after click the “burn” option at the top of Windows Media Player?

“The process of copying CD is possible with any computer…” The word “possible” is closest in meaning to…

• Improbable

•  Probable

•  Unlikely

•  Doubtful

• Suspicious

The Ways to Activate the Hand Phone

 

·         First, open the cover of the hand phone.

·         Secondly, open the battery part of the phone and you can find sim card slot inside.

·         Third, insert the sim card to the sim card slot and put back the battery.

·         Fourth, close the battery with a cover of the hand phone.

·         Fifth, connect the cable of charger to the hole in the bottom of the hand phone. Charging the battery may take four up to six hours.

·         Sixth, when the battery is fully charged, the bar will stop scrolling.

·         Seventh, we can activate the hand phone with pushing the button on the side of it.

·         Finally we are ready to use our hand phone.

What should we do after inserting the sim card?

• Open the cover of the hand phone.

• Disconnect the charger.

• Close the battery with the cover of hand phone.

• Insert the battery inside.

• Connect the cable of charger to the hole in the bottom of the hand phone

The Ways to Activate the Hand Phone

·         First, open the cover of the hand phone.

·         Secondly, open the battery part of the phone and you can find sim card slot inside.

·         Third, insert the sim card to the sim card slot and put back the battery.

·         Fourth, close the battery with a cover of the hand phone.

·         Fifth, connect the cable of charger to the hole in the bottom of the hand phone. Charging the battery may take four up to six hours.

·         Sixth, when the battery is fully charged, the bar will stop scrolling.

·         Seventh, we can activate the hand phone with pushing the button on the side of it.

·         Finally we are ready to use our hand phone.

What should we do after inserting the sim card?

“Fifth, connect the cable of charger to the hole in the bottom of the hand phone”. The antonym of the underlined word is …

• height

• case

• length

• upper

• Side

How to Clean an LCD Screen

 

1. Shake up the detergent and put it 15-20 cm away from the LCD screen.

2. Spray on the LCD screen surface directly.

3. Cleanse gently using the fabric cleanser or brush.

 

You can also do the following steps:

1. Spray the detergent on the fabric cleanser.

2. Clean the LCD screen surface to make it as bright as a new one.

What is the purpose of the text above?

• To describe about how to clean an LCD screen.

• To describe about how to spray the detergent.

• To inform about an LCD screen.

• To inform about the fabric cleanser or brush.

• To retell about spraying an LCD screen.

How to Clean an LCD Screen

1. Shake up the detergent and put it 15-20 cm away from the LCD screen.

2. Spray on the LCD screen surface directly.

3. Cleanse gently using the fabric cleanser or brush.

You can also do the following steps:

1. Spray the detergent on the fabric cleanser.

2. Clean the LCD screen surface to make it as bright as a new one.

Before cleaning the screen surface, we spray the detergent on the screen surface directly or spray it on….

• Our fingers

• The brush

• The fabric cleanser

• The LCD

• The paper

HOW TO CLEAN A REFRIGERATOR

1. Remove all frozen foods and ice cube trays. If you have a second refrigerator, use it to temporary store these items. If not, put the food in a cardboard box and cover it with newspaper. Dump the ice cubes.

2. Removes all other food stuff and place on your kitchen counter or in cardboard boxes.

3. Either turn the temperature control "defrost" or unplug the electricity to the refrigerator (or both).

4. Never scrape or jab at the ice with a sharp instrument. You may cause serious damage to the freezing unit. Allow it to melt.

5. Either put a flat pan under the freezer to catch the drips or put a large towel in the bottom of the refrigerator.

What should we do after turn the temperature control “defrost”?

• Allow the ice to melt.

• Put a flat pan under the freezer.

• Remove all frozen foods and ice cube trays.

• Remove all other food stuff.

• Scrape the ice with a sharp instrument.

HOW TO CLEAN A REFRIGERATOR

1. Remove all frozen foods and ice cube trays. If you have a second refrigerator, use it to temporary store these items. If not, put the food in a cardboard box and cover it with newspaper. Dump the ice cubes.

2. Removes all other food stuff and place on your kitchen counter or in cardboard boxes.

3. Either turn the temperature control "defrost" or unplug the electricity to the refrigerator (or both).

4. Never scrape or jab at the ice with a sharp instrument. You may cause serious damage to the freezing unit. Allow it to melt.

5. Either put a flat pan under the freezer to catch the drips or put a large towel in the bottom of the refrigerator.

 “Allow it to melt” (step 4). The word “it” refers to…..

• The electricity

• The freezing unit

• The refrigerator

• The ice

• The food

The best arrangement of the steps below are ...

(1) Don’t forget to wash hands after cleaning the working area.

(2) Press the button to start heating the food.

(3) Finally, take out the food and enjoy it.

(4) Don’t forget to decide how long it will heat the food.

(5) Wait for the beep sound. It indicates the cooking process is done.

(6) Put the food into the microwave.

• 2-6-4-5-3-1

• 6-2-3-1-4-5

• 6-2-5-4-3-1

• 6-2-4-5-3-1

• 6-2-1-4-5-3