Correct the instructions

To change the oil in your car, the vehicle is parked on a levle surface.

• 1.       To change the oil in your car, start by parking the vehicle on a level surface.

• 1.       To change the oil in your car, you might need to partk your car on a level surface.

• While changing the oil in your car, it is parked on a level surface.

• Park the car to change the oil in your car.

Pop open the hood and locate the oil drain plug, usually positioned somewhere near the bottom.

• Locate the oil drain plug, located on the bottom of the engine.

• Popo the hood. Locate the drain.

• The engine hood is popped and the drain located.

• Next, pop open the hood and locate the oil drain plug, usually positioned on the bottom of the engine.

With an appropriate tool, loosen the plug and have an oil pan ready.

• Loosen the plug with a wrench. Have a pan ready to catch the oil.

• With a wrench, carefully loosen the plug in a counterclockwise direction, ensuring to have an oil pan positioned directly below to catch the draining oil.

• The oils is caught in a pan after having loosened the plug with a wrench.

• Catch the draining oil using a pan after loosening the plug with a wrench having used a counterclockwise motion.

Once the oil has been drained, the drain plug is tightened using a tool.

• After draining the oil the plug needs to be snug again.

• Tighten the plug with a tool after draining.

• Once the oil has completely drained, securely tighten the drain plug using the wrench, making sure it is snug.

• Make the plug snug again after draining the oil by using a tool that is right for the job.

Locate the oil filter, typically near the engine block, and use an oil filter wrench to loosen it.

• Proceed by locating the oil filter, typically near the engine block, and use an oil filter wrench to loosen it in a clockwise motion.

• The oil filter is located and a wrench is used to loosen it.

• Loosen the oil filter near the engine block.

• After locating the filter, loosen it.

The old filter is carefully removed by hand, taking care not to spill any residual oil.

• Once loose, carefully remove the old filter by hand.

• Once loose, carefully remove the old filter, taking care not to spill any residual oil.

• Residual oil should not be spilled while carefully removing the old filter.

• Once loose, carefully remove the old filter by hand, taking care not to spill any residual oil.

Install the new oil filter, lightly coat the rubber gasket on the filter with fresh oil.

• Before installing the new oil filter, lightly coat the rubber gasket.

• Before installing the new oil filter, lightly coat the rubber gasket on the filter with fresh oil.

• The rubber gasket is coated with fresh oil before installing the new oil filter.

• The rubber gasket is lightly coated with oil after having installed the new filter.

Then, the new filter is threaded onto the engine by hand, turning it in a clockwise direction until it's snug. Avoid overtightening.

• Then, thread the new filter onto the engine by hand, turning it until it's snug. Avoid overtightening.

• Then, thread the new filter onto the engine by hand, turning it in a clockwise direction.

• Then, thread the new filter onto the engine by hand, turning it in a clockwise direction until it's snug. Avoid overtightening.

• Then, thread the new filter onto the engine, turning it in a clockwise direction until it's snug. Avoid overtightening.

Now, refer to your vehicle's manual.

• Now, refer to your vehicle's manual to determine the appropriate oil type and capacity.

• Now, your vehicle's manual is referred to to determine the appropriate oil type and capacity.

• Now, read the manual to determine the appropriate oil .

• The vehicle's manual is referred to.

The oil cap on the top of the engine is removed and a funnel in the opening is placed.

• Remove the oil cap on the top of the engine and place a funnel in it.

• Remove the oil cap and place a funnel in it.

• The oil cap on the is removed and a funnel is placed in it.

• Next, remove the oil cap on the top of the engine and place a funnel in the opening.