Manual trans post

When will a noisy pilot bearing be its loudest?

• The crank and clutch assembly rotate at different speeds

• The crank and clutch turn at the same speed

• First gear is engaged

• Reverse is engaged

Depressing the clutch pedal causes...

• the clutch to disengage

• the shifting clutch to engage

• the clutch to engage

• the flywheel to move away from the clutch disk

Select all correct answers! What can cause a transmission to jump out of gear?

• Worn church keys

• Incorrect selector adjustment

• Worn or damaged engine/trans mount

• Incorrect TCM coding or basic settings

If the engine RPM increases while in a gear, but vehicle speed does not increase...

• the clutch is slipping

• the clutch master cylinder is leaking internally

• the torque converter is in fluid coupling

• the lock-up clutch solenoid has failed

If a vehicle with a hydraulic release bearing "chatters" as the clutch pedal is released...

• the release bearing may have contaminated the clutch disc

• the release bearing has an internal bypass leak

• the master cylinder may be low

• rear caster may be out of specification

The clutch is an external transmission component.

• True

• False

When would a noisy release bearing be its loudest?

• With the clutch disengaged

• With the clutch engaged

• With the engine off, and shifting through the gears

• While turning

What is the most likely cause of transmission noise, only when turning?

• The differential

• The synchros are worn

• Excessive output shaft clearances

• Excessive input shaft clearances

Select all that apply. Which are possible symptoms of incorrect gearbox fluid or fluid additives?

• Difficult shifting when cold

• Transmission jumps out of gear

• Accelerated wear

• Vibration under load

How do you adjust a VW hydraulic clutch?

• There is no adjustment

• Turn the set screw in 90 degree increments with the VAS6558A

• Using PlastiGauge

• Using a dial indicator in the freeplay adjustment bore