IC 85 - 126

Buildings used for assembly can be classified as a Group B occupancy when the occupant load is less than ___ persons.

• 49

• 50

• 60

• 100

What is the minimum thickness of a concrete floor slab supported directly on the ground?

• 3 inches

• 3 ½ inches

• 4 inches

• 6 inches

What is the maximum allowable span for a 2-2 x 8 girder within an exterior bearing wall supporting a roof and ceiling only having a building width of 28 feet with a ground snow load of 50 psf?

• 5’ - 0”

• 5’ - 11”

• 6’ - 6”

• 7’ - 3”

Which occupancy group is a Physician's office classified as?

• B

• A-3

• I-1

• I-2

In conventional light-frame building construction, anchor bolts which anchor sill plates resting on concrete foundations shall have a minimum diameter of ____ inches spaced a maximum ___ feet on center and extend a minimum of ___ inches into concrete.

• 1/2", 6’, 7”

• 1/2", 6’, 12”

• 5/8", 6’, 7”

• 5/8", 4’, 7”

True or False. Framing inspections shall be made before the approval of rough plumbing inspection.

• True

• False

A fire door shall be rated for a minimum of ___ minutes when located within a 3-hour exterior wall assembly.

• 20

• 45

• 60

• 90

Concrete footings shall be protected from freezing during depositing and for a minimum time period of thereafter. HINT: IBC, Section 1808.8.4.

• 3 days

• 12 hours

• 24 hours

• 5 days

Where plain concrete is permitted for construction of exterior basement bearing walls, the minimum required thickness shall inches. Table 1807.1.6.2 and ACI 318-Table 14.3.1.1.

• 8

• 7

• X7.5

• 6

Evaluation of load tests of deep foundation elements is permitted to use all methods except which one of the following:

• Davisson Offset Limit

• Brinch-Hansen 90-percent Criterion

• Darcy-Weisbach Limit

• Butler-Hoy Criterion.