Continuous Assessment 1 EDEN

Nodal analysis is mainly based on __________

• KVL

• KCL

• Voltage Divider rule

• Faraday's law

What is the voltage at terminal 1 in the given circuit

• 0 V

• 135 V

• -135 V

• 20 V

A Super Mesh analysis could be done when there is a common _____________ between any two loops.

• Current source

• Voltage source

• Resistor

• Both voltage and current source

The value of the voltage controlled current source i_a=βv_a given β=0.3 and v_a=9.5mV.

• 2.5 mA

• 2.85 mA

• 1.75 mA

• 1.2 mA

In figure dependent source is __________________________type

• current controlled voltage source

• current controlled current source

• voltage controlled voltage source

• voltage controlled current source

What is the other name for Dependent sources?

• Uncontrolled sources

• Time response elements

• Steady state elements

• Controlled sources

By using source transformation voltage source in series resistor is replaced by __________

• Voltage source in series with a resistor

• Current source in parallel with a resistor

• Voltage source in parallel with a resistor

• Current source in series with a resistor

Norton’s equivalent circuit consists of a _____________

• Voltage source in series with a resistor

• Current source in parallel with a resistor

• Voltage source in parallel with a resistor

• Current source in series with a resistor

In a network maximum power transfer occurs when __________

• R_Th= R_L

• R_Th/R_L =0

• R_Th+R_L= 1

• R_Th-R_L= 1

The Superposition principle is obeyed by ____________

• Non-linear networks

• Lateral networks

• Linear networks

• Non-linear networks and linear networks