What is the correct procedure for changing the wheels on the BaseBot?

After removing the "old" wheel, slide a High Strength Shaft Adapter over the shaft, and slide the wheel over the shaft adapter. Then, use a Rubber Shaft Collar or Click-On Spacer to hold the wheel in place.

After removing the "old" wheel, slide the tire on to the shaft and then add a 1x4 Plastic Linkage Beam with a Traction Link.

After removing the "old" wheel, slide the tire onto the shaft and then add a 36 Tooth Gear.

After removing the "old" wheel, add a High Strength Adapter over the shaft when using the Balloon Tire only, as it is not necessary for the other three tires.

What is the correct procedure for playing the Figure Eight Wheel Challenge?

Choose the wheel combination and controller configuration that you are most comfortable with; place the robot on the Field with the back wheels touching the wall; start the project on the Brain; if the robot touches the walls or either of the Buckyballs, reset any moved Buckyballs and move your robot back to the starting position

Choose the wheel combination, and controller configuration that you are most comfortable with and start the project on your Brain.

Choose the wheel combination and controller configuration that you are most comfortable with; place the robot on the Field with the front wheels touching the Buckyball.

Choose the wheel combination and controller configuration that you are most comfortable with; place the robot on the Field with the back wheels touching the wall; start the project on the Brain; if the robot touches the walls or either of the Buckyballs, do not start over.

What happens if you touch a Buckyball or wall while playing the Figure Eight Wheel Challenge?

You have to put your robot back at the start

Which of the following is a common use of the Bumper Switch?

To trigger a robot action when pressed or released

To sense the distance of an object

To determine the direction your robot is facing

What happens after you configure a sensor in VEXcode EXP?

Blocks related to that sensor appear in the Toolbox.

Your project is automatically downloaded to the Brain.

The project is named after the sensor.

An alert pops up telling you which port on the Brain your sensor is connected to.

Which of the following explains the steps you would take to configure the Bumper Switch?

Open the Devices Window, select 'add a Device', select 3-Wire, select Bumper, select a Port, and select Done.

Open Devices Window, Select the Distance Sensor Icon, Check and Select the correct Port

Select the Bumper Switch icon, Download the program to the Brain, Select the Correct Port

Select a Controller Configuration and Select the Bumper Switch Icon

Which of the following best describes why a Drivetrain would be assigned to Controller joysticks in VEXcode EXP?

To code the sensors in a project while also being able to drive the robot with a controller.

To code individual motors to make different actions with a Drivetrain configured.

To make blocks about the Brain screen appear in the Toolbox.

To automatically download the VEXcode EXP project to your Brain.

Which of the following is the correct procedure for preparing to play the one-on-one Freeze Tag match?

Create and download the VEXcode project in the activity sheet to each robot's Brain, checking to be sure one robot has the color 'green' and one has the color 'blue' on their robot's Brain screen; choose your controller configuration and download it to the Brain; place each robot on the Field with the Bumper Switch against the back wall; Play Freeze Tag!

Place each robot on the Field with the Bumper Switch against the back wall; download the VEXcode EXP project on the activity sheet to each robot's Brain; place 3-5 Buckyballs on the Field; play Freeze Tag

Create and download the VEXcode project in the activity sheet to each robot's Brain, checking to be sure both robots have the color 'green' on their Brain screen; place each robot in the center of the Field with the Bumper Switches touching; Play Freeze Tag!

Place each robot on the Field with the Bumper Switch facing the middle of the Field, Download the project in the activity sheet to each robot's Brain, Configure your controller.

What happens if your opponent triggers your Bumper Switch?

Your opponent gets one point and your controller is disabled for three seconds

You get one point and have to move back to the starting position

How do you win a one-on-one Freeze Tag match?

You push your opponent into the wall

You disable your opponent's Bumper Switch

For this Team Freeze Tag competition, how many robots will be on the field competing at one time?

Four robots, each robot is on its own team

Two robots, they work together on the same team

What should be changed by team's in the VEXcode project?

The screen fill color should match the alliance color and the Controller configuration should match the team's preference.

Only the screen fill color should change depending on the color of the team.

Only the Controller configuration should be changed.

Nothing should be changed by a team.

Which of the following is the correct procedure for preparing to play Team Freeze Tag?

Download the VEXcode project to your Brain, place your robot in the starting location, start driving once the timer is started.

Open a blank VEXcode project on your device, create an autonomous program to have the BaseBot move around the Field, place your robot in the starting location, start the project once the timer is started.

Edit your robot build so that it is larger than 30cm by 30cm, or 12" by 12", place your robot in the starting location.

Start the timer, then edit the VEXcode EXP project to match your preferred Controller configuration and download it to your Brain.

Which of the following is not a rule for Team Freeze Tag?

A tag is whenever you bump into the Brain of the other robot.

Each match is 1 minute long and is played by two teams (with two robots each) on a 4' by 6' field.

During the match, your robot must remain in motion unless you are tagged.

No trapping other robots into a corner. You may only tag another robot twice in rapid succession. "Rapid succession" is multiple tags within 5 seconds.

Robotics Team Freeze Tag - CYU

6th Grade

•

28 Qs

Similar activities

Internet Terms Grade 7 & 8

6th - 8th Grade

•

29 Qs

Von Neumann architecture

2nd - 9th Grade

•

25 Qs

Send and Receive Email

6th Grade

•

23 Qs

Computer Basics الصف الاول الاعدادي شهر اكتوبر

6th Grade

•

23 Qs

Business Letters and MS Word

6th - 12th Grade

•

30 Qs

Coding Quiz!

6th - 8th Grade

•

23 Qs

End of term coding revision

5th - 9th Grade

•

25 Qs

JOSH AND CHARLIE'S Micro$oft $hortcut$

KG - University

•

24 Qs

Robotics Team Freeze Tag - CYU

Quiz

•

Computers

•

6th Grade

•

Practice Problem

•

Hard

Mr. Rutherford

Used 9+ times

FREE Resource

28 questions

Show all answers

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which button on the Brain should be selected to Run the Driver Control program once it is highlighted?

The checkmark button on the Brain

The X button on the Brain

The L button on the Controller

Joystick A on the Controller

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which of the following driver control configurations are being shown in this image?

Tank drive

Left arcade

Right arcade

Split arcade

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which of the following driver control configurations would drive the BaseBot forward, reverse, left, and right all using the right joystick?

Tank drive

Left arcade

Right arcade

Split arcade

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which of the following driver control configurations would drive the left motor of the BaseBot using the left joystick, and the right motor of the BaseBot using the right joystick?

Tank drive

Left arcade

Right arcade

Split arcade

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which of the following is the correct procedure for playing the Drive a Figure Eight challenge?

Choose the controller configuration you are most comfortable with and start that project on your Brain; Place your robot at the starting position; start the timer; drive the BaseBot through the Buckyballs in a figure 8 pattern trying not to touch the walls or the Buckyballs; add four Buckyballs and start over if you touch the walls or the Buckyballs; the fastest driver wins!

Place your robot at the starting position; choose the controller configuration you are most comfortable with and start that project on your Brain; start the timer; drive the BaseBot through the Buckyballs in a figure 8 pattern trying not to touch the walls or the Buckyballs; reset the Buckyballs and start over if you touch the walls or the Buckyballs; the fastest driver wins!

Place your robot in the center of the Field; choose the controller configuration you are most comfortable with and start that project on your Brain; start the timer; drive the BaseBot into the Buckyballs; the slowest driver wins!

Place your robot in the center of the Field; drive the BaseBot through the Buckyballs in a figure 8 pattern trying not to touch the walls or the Buckyballs; reset the Buckyballs and start over if you touch the walls or the Buckyballs; the fastest driver wins!

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What happens if you touch a Buckyball or wall while playing the Challenge Activity?

You have to start over

You get one point

You can move a Buckyball wherever you want

You win the mini-game

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

How do you win in the Figure 8 Challenge Activity?

You complete the course in the fastest amount of time

You touch both Buckyballs

You drive in a square around only one Buckyball

You drive into the wall

Create a free account and access millions of resources

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

23 questions

Internet Basics

Quiz

•

6th Grade

29 questions

Internet Terms Grade 7 & 8

Quiz

•

6th - 8th Grade

29 questions

COMPTIA ITF

Quiz

•

1st Grade - Professio...

23 questions

Midterm Quiz Practice for Grade 6

Quiz

•

6th Grade

24 questions

1A Quiz on Game Design with Scratch

Quiz

•

5th - 9th Grade

24 questions

Code.org Vocab

Quiz

•

6th - 7th Grade

25 questions

CSD Unit 5, Chapter 1 Review

Quiz

•

6th - 12th Grade

28 questions

Level1_Chủ đề 1_ Test 1

Quiz

•

6th Grade

Popular Resources on Wayground

5 questions

This is not a...winter edition (Drawing game)

Quiz

•

1st - 5th Grade

15 questions

4:3 Model Multiplication of Decimals by Whole Numbers

Quiz

•

5th Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

10 questions

The Best Christmas Pageant Ever Chapters 1 & 2

Quiz

•

4th Grade

12 questions

Unit 4 Review Day

Quiz

•

3rd Grade

10 questions

Identify Iconic Christmas Movie Scenes

Interactive video

•

6th - 10th Grade

20 questions

Christmas Trivia

Quiz

•

6th - 8th Grade

18 questions

Kids Christmas Trivia

Quiz

•

KG - 5th Grade

Discover more resources for Computers

18 questions

Company Logos

Quiz

•

6th - 8th Grade

20 questions

Logos

Quiz

•

2nd - 8th Grade

Robotics Team Freeze Tag - CYU

28 questions

Which button on the Brain should be selected to Run the Driver Control program once it is highlighted?

Which of the following driver control configurations are being shown in this image?

Which of the following driver control configurations would drive the BaseBot forward, reverse, left, and right all using the right joystick?

Which of the following driver control configurations would drive the left motor of the BaseBot using the left joystick, and the right motor of the BaseBot using the right joystick?

Which of the following is the correct procedure for playing the Drive a Figure Eight challenge?

What happens if you touch a Buckyball or wall while playing the Challenge Activity?

How do you win in the Figure 8 Challenge Activity?

Which EXP Wheel is made of a hard rubber and would allow the robot to drive forward accurately?

Jessica said that she wants to choose a tire for her robot that will allow it to move easily from side to side. Which wheel should she choose?

Which of the EXP Wheels has flexible rubber that would work well as part of an multi-surface design?

Create a free account and access millions of resources

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Computers