141 - 175

A revolving door shall be provided with a side-hinged swinging door located in the same wall and within _______________ feet of the revolving door.

• 5

• 10

• 20

• 50

In general, door handles, pulls, latches, locks and other operating devices shall be installed a minimum of _______________ inches and a maximum of _______________ inches above the finished floor.

• 32, 48

• 34, 42

• 34, 48

• 36, 54

On graded sites, the top of any exterior foundation must extend above the elevation of the street gutter at point of discharge or the inlet of an approved drainage device a minimum of ___________________.

• 8 inches plus 2 percent

• 12 inches plus 2 percent

• 12 inches plus 50 percent

• 16 inches plus 2 percent

A Single Family Home is and example of what occupancy group?

• R-1 occupancy group

• R-2 occupancy group C. R-3 occupancy grou

• R-3 occupancy group

• R-4 occupancy group

In assembly seating the aisle width must provide sufficient egress capacity for the number of persons accommodated by the ____________ area served by the aisle.

• building

• seating

• open

• catchment

There shall be a minimum clear space of _______________ inches between a handrail and a wall or other surface.

• 1¼

• 1½

• 2

• 2¼

The maximum permitted rise of any ramp shall be _______________ inches.

• 30

• 44

• 48

• 60

Unless having a maximum height of _______________ inches, turnstiles shall be regulated as for revolving doors or security access turnstiles.

• 34

• 36

• 38

• 39

Where a railing is used as edge protection along the side of a ramp run, it must have a rail mounted to prevent the passage of a maximum_______________-inch sphere, where any portion of the sphere is within 4 inches of the ground.

• 4

• 6

• 8

• 12

Maximum breakout force for a revolving door?

• 70 pounds

• 100 pounds

• 130 pounds