Gr 4 Electric Circuits Part 2

1. Which will light a bulb?

• A. A battery and a paper clip
• B. A battery and a wire
• C. A paper clip and a wire
• D. A switch and a wire

Tags

NGSS.MS-ETS1-1

2. Electricity needs a pathway to light a bulb. Where does electricity enter and exit the bulb?

• A. 1 and 2
• B. 2 and 3
• C. 3 and 4
• D. 4 and 1

Tags

NGSS.4-PS3-2

3. Electricity needs a pathway to light a bulb. Which part of the bulb gives off light?

• A. 1
• B. 2
• C. 3
• D. 4

4. Light bulbs use electricity to make light. What else do light bulbs often give off?

• A. Food energy
• B. Heat energy
• C. Solar energy
• D. Wind energy

Tags

NGSS.MS-PS3-3

NGSS.MS-PS1-4

5. Which bulbs will light?

• A. 1 and 2
• B. 2 and 3
• C. 3 and 4
• D. 4 and 2

6. Look at drawing 4. What is the wire?

• A. A conductor
• B. A receiver
• C. An insulator
• D. An energy source

Tags

NGSS.MS-PS1-2

7. Look at the circuit tester below. When the bare ends of the two wires are touched together, the light does not go on. You need to troubleshoot to find out what is wrong. Which of the choices below is NOT something you would check to fix this circuit tester?

• A. Are the wires firmly connected to the bulb socket?
• B. Are the wires firmly attached to the battery holder?
• C. Is the bulb burned out?
• D. Is the switch turned off?

9. Which best describes objects that can complete a circuit?

• A. Most are silver in color.
• B. Most are thick and smooth.
• C. Most are made of metal.
• D. Most are long and flexible.

10. What powers the circuit?

• A. 1
• B. 2
• C. 3
• D. 4

11. Which is the receiver?

• A. 1
• B. 2
• C. 3
• D. 4