Engineering Design and Development Inventor Unit 1 Quiz

1- Create this part in Inventor. Your part must be fully defined.  Save it and name it Last Name_First Initial_Unit 1 Q1 (12 pts)


2-What is meant by design intent when designing parts in Inventor?

1. 2- Download the part below (which is posted in google classroom) and save it in your project as Last Name_First Initial_Unit 1 Q2. Submit your completed part

1. A- Edit the extrusion height of the rectangle to 2 inch and the width to be 8 inches. 

2. The cylinder and the cut out rectangle must stay centered on the part.  (3 pts)

3. B-Edit the extrusion of the cylinder to be 5 inches tall. (2 pts)

5. C- Edit the diameter of the hole to be 1 inches and for the depth to go up to

6. the top surface of the rectangle regardless of the height of the cylinder. (3 pts)

8. D- What is the volume of your new part _____________ (1 pt)

10. E- Bonus: Mirror the cut out rectangle to the other side of the base block.

11. Do this only after getting the volume above (2 pts)

What is meant by "design intent" when designing parts in Inventor, according to the quiz instructions?

• The color scheme of the part

• The cost analysis of the part

• The underlying purpose or rationale behind the part's design

• The environmental impact of the part

To what should your first sketch always be referenced to?

• There is no object present to reference it to.

• Origin

• Axis

• Center line

When does an object turn black in Inventor?

• when it is being moved

• when it is tied to the origin

• when there is an error with the sketch

• when it is partially defined

• When it is fully defined

If you had a model of a 3" x 4" rectangle that is extruded 1", how would you change it to a 3"x4" that is extruded 3"?

• edit sketch

• edit feature

• use the polygon command

• erase

• use power trim

What is the first thing to do when beginning a sketch?

• Draw a sketch

• Pick a plane

• Choose material

• Dimension to the origin

Before you can create a solid feature, you must first:

• Create a sketch

• Draw a line

• Use the revolve tool

• Use the extrude tool

What do you call a new project in Inventor?

• New Inventor Project

• New Part

• New Single User Project

• New IPT

What type of dimension controls geometry of a sketch?

• Driven

• Driving

• Mating

• Isometric