What does the "Move for Duration" block do in a movement block motor setup?

It moves the Driving Base forward or backward for a specified number of centimeters, inches, seconds, degrees, or rotations.

It stops the motor after a set duration.

It sets the movement speed of the motor.

What happens when you use a steering value of +99 in the "Move with Steering for Duration" block?

The Driving Base makes a sharp right turn.

The Driving Base moves in a straight line.

What is the function of the "Stop Moving" block?

It stops the motor(s) from moving.

It increases the speed of the motor.

It changes the direction of the motor.

It sets the motor rotation to a specific value.

What does the "Set Movement Speed" block do?

It sets the motors to move at a percentage of their maximum speed.

It defines which motors are used for movement.

It moves the Driving Base for a specific duration.

It calibrates the Driving Base.

How does the "Set 1 Rotation to Distance Moved" block function?

It defines how many centimeters or inches one motor rotation equals.

It stops the motor after one rotation.

It sets the speed of the motor.

What does the "Start Moving at Speed" block do in a movement program?

It moves the driving base forever at a specified speed for left and right motors.

It sets the acceleration of the motors.

It sets the motors to brake at stop.

What happens when you set the movement motors to "brake" at stop?

The motors use power to brake but do not move back to the original position.

The motors stop and move back to the position when it stopped.

The motors coast to a stop without using power.

How can you change the orientation of the display on the Light Matrix?

By setting the orientation to upright, left, right, or upside down

By turning the matrix off and on

What does the 'Turn on 5X5 Light matrix for Seconds' function allow you to do?

Create a pattern that lights up for a specific amount of time

Set the matrix to a single brightness level

What action does the 'Rotate Orientation (Clockwise)' function perform on the 5X5 Light Matrix?

Rotates the display of the matrix clockwise or counterclockwise

Changes the color of the lights

Adjusts the brightness of the lights

Turns the matrix off after a set time

What does the "Set Center Button Light" block do?

Sets the color of the Center Button light

Changes the sound of the button

Turns off the Center Button light

What is the function of the "Light up Distance Sensor" block?

Turns on the lights on the four segments of the Distance Sensor

Changes the color of the Distance Sensor

What does the "Write on 5X5 Matrix" block do?

Displays a text string on the 5X5 Light Matrix that scrolls by

Writes a number on the 5X5 Light Matrix

Creates a static image on the 5X5 Light Matrix

What happens when you use the "Turn off Pixels" block?

It turns off all the lights on the 5X5 Light Matrix

It changes the color of the pixels

It turns on all the lights on the 5X5 Light Matrix

What does the "Turn on 5X5 Light Matrix" block accomplish?

It creates a pattern that stays lit on the 5X5 Light Matrix

It dims the lights on the 5X5 Light Matrix

It turns off the lights after a few seconds

It scrolls text across the 5X5 Light Matrix

What does the "turn on for 2 seconds" block do in the 3X3 Light Matrix?

Turns on the light for 2 seconds

Turns off the light after 2 seconds

Increases the brightness of the light

What is the function of the "set pixel brightness to 75%" block?

Sets the brightness of all pixels to 75%

Changes the color of a specific pixel

How can you change the brightness of a specific pixel in the 3X3 Light Matrix?

Use the "set pixel at 1,1 to 100%" block

Use the "set orientation to upright" block

Use the "turn off pixels" block

What does the "set orientation to upright" block do?

Sets the matrix orientation to upright

Changes the brightness of the pixels

What does the "Play Sound until Done" block do?

Plays a sound and waits until it is finished before moving to the next block

Plays a sound continuously without stopping

Plays a sound and stops other sounds from playing

What is the function of the "Play Beep for Seconds" block?

Plays a beep sound for a specified number of seconds

Changes the pitch of a beep sound

Stops all sounds after a few seconds

Starts a beep sound without timing

What happens when you use the "Stop All Sounds" block?

Stops all sounds that are currently being played

Changes the pitch of all sounds

How does the "Change Pitch Effect By" block alter sounds?

It changes the pitch or pan left/right effect of the sounds

It records a new sound with a different pitch

It changes the volume of the sound

What does the "Set Pitch Effect By" block do?

Changes the pitch or pan left/right effect of sounds being played

Sets a timer for how long the pitch will last

Stops all sounds and sets a new pitch

What does the "Set Volume" block do in sound programming?

Sets the volume of the sound to a specified level

Increases the volume by a specific percentage

What does the "Clear Sound Effects" block do?

Resets the pitch and pan effects to normal

What happens when the "when program starts" block is activated in the event blocks?

It plays all the blocks attached to it in sequence.

It changes the color of the blocks.

It detects the color of an object.

What does the "when color is" block do when activated?

It plays all the blocks attached to it when a specified color is detected.

What triggers the "when pressure is" block?

When the Force Sensor is pressed, hard-pressed, released, or a change in pressure is detected.

When the block is moved to a different location.

What condition activates the "when closer than" block?

When the Distance Sensor detects that an object is closer than or further than the specified distance.

When the light intensity changes.

What does the "when tilted" block do?

It plays all the blocks attached to it when the Hub is tilted in the specified direction.

It measures the distance of tilt.

What happens when the "when hub orientation is up" block is used?

It plays all the blocks attached to it when the Hub is in the specified orientation.

It changes the color of the Hub.

It stops all activity until reoriented.

It detects the temperature of the Hub.

What happens when the Hub is shaken according to the image?

It plays all the blocks attached to it.

It disconnects from the network.

What does the 'When Hub Button Pressed' block do?

It plays all the blocks attached when the Left or Right Buttons are pressed or released.

What is the function of the 'When Timer' block as shown in the image?

It plays all the blocks attached when the time exceeds the specified value.

According to the image, what does the 'When I receive Message' block do?

It plays all the blocks attached when a specified message is broadcasted.

What is the purpose of the 'Broadcast Message and Wait' block as described in the image?

It broadcasts a message and waits until all programming stacks with the specified message finish before moving to the next block.

What does the "Wait for Seconds" block do in programming?

It pauses the stack for a specified number of seconds.

It stops all programming stacks.

It repeats a set of blocks forever.

It checks if a condition is true or false.

Motor Control Quiz

Authored by Elma Ball

Mathematics

4th Grade

Used 1+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

81 questions

Show all answers

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What is the default speed percentage set when using the "Run Motor for Duration" block?

50%

75%

100%

25%

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What does the "Motor Go to Position" block do?

Stops the motor

Changes the direction of the motor

Reports the motor's current position

Moves the motor to a specified position

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What happens when the "Stop Motor" block is used?

The motor speeds up

The motor continues running

The motor stops and brakes

The motor's speed is reported

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which block is used to report the current speed of the motor?

Motor Position

Set Motor Speed

Motor Speed

Start Motor

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What does the "Go to Relative Position at Speed" block do in motor programming?

It moves the motor to an absolute position at a specified speed.

It runs one or more motors to a relative position at a specified speed.

It sets the motor to stop at a relative position.

It checks the power level of the motor at a relative position.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What is the default method used by the "Stop Motor Block" to stop the motor?

Coast

Brake

Hold position

Reverse

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

How is the motor's power regulated when using the "Start Motor with Power" block?

The power is unregulated.

The power is regulated based on the motor's speed.

The power is regulated based on the motor's position.

The power is regulated based on the motor's temperature.

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

86 questions

Times Tables and Division

Quiz

•

3rd - 9th Grade

86 questions

Question Bank for Grade 4 Mathematics

Quiz

•

4th Grade

82 questions

Basic Facts 5 — 8

Quiz

•

4th Grade

85 questions

SC READY Math

Quiz

•

3rd - 4th Grade

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

29 questions

Alg. 1 Section 5.1 Coordinate Plane

Quiz

•

9th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

11 questions

FOREST Effective communication

Lesson

•

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

Discover more resources for Mathematics

15 questions

Equivalent Fractions

Quiz

•

4th Grade

$Adding and Subtracting fractions with Like denominators quiz$

12 questions

Adding and Subtracting fractions with Like denominators quiz

Quiz

•

4th Grade

16 questions

multiplication facts

Quiz

•

4th Grade

14 questions

Comparing Decimals

Quiz

•

4th Grade

15 questions

Decomposing Fractions

Quiz

•

4th Grade

15 questions

Fractions on a Number Line

Lesson

•

3rd - 4th Grade

10 questions

Measuring Angles using a Protractor

Quiz

•

4th Grade

18 questions

Comparing Fractions

Quiz

•

4th Grade

Motor Control Quiz

What is the default speed percentage set when using the "Run Motor for Duration" block?

What does the "Motor Go to Position" block do?

What happens when the "Stop Motor" block is used?

Which block is used to report the current speed of the motor?

What does the "Go to Relative Position at Speed" block do in motor programming?

What is the default method used by the "Stop Motor Block" to stop the motor?

How is the motor's power regulated when using the "Start Motor with Power" block?

What does setting the motor acceleration to "Medium" typically set the acceleration value to for a Small Motor?

What does the "Move for Duration" block do in a movement block motor setup?

What happens when you use a steering value of +99 in the "Move with Steering for Duration" block?

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Mathematics