Drill Press ID and Safety Quiz

What is the function of the 'Variable Speed Adjustor' in a Drill Press?

• To adjust the height of the table

• To change the speed of the drill

• To lock the spindle in place

• To switch the drill on or off

Which part of the Drill Press is used to hold the drill bit?

• Spindle

• Chuck

• Hand Wheel

• Column

What is the purpose of the 'Table Lock' on a Drill Press?

• To secure the drill bit

• To adjust the speed of the drill

• To lock the table in a fixed position

• To turn the machine on or off

What should you always do before using the drill press according to the safety rules?

• Turn off the machine

• Obtain permission from the instructor

• Wear gloves

• Start the drill press

According to the safety rules, what is essential to wear when operating the drill press?

• Safety glasses

• Ear protection

• A helmet

• A face mask

How far should your hands be kept from a moving brad point or twist drill according to the drill press safety rules?

• At least 1 inch

• At least 2 inches

• At least 4 inches

• At least 6 inches

What is the rule regarding the position of the work piece relative to the drill bit?

• Keep the short side on the left

• Keep the long side on the right

• Keep the long side on the left

• Position does not matter

What should be checked before starting the drill press to ensure the bit is ready for use?

• The drill press is turned off

• The bit is properly sharpened and securely fastened in the drill chuck

• The drill press is at the highest speed

• The work area is clean

What is the purpose of setting the depth stop on a drill press?

• To prevent the machine from moving

• To control the depth of the hole being drilled

• To increase the drilling speed

• To hold the workpiece in place

What should be done to prevent "burning" of the drill bit when drilling deep holes?

• Drill faster

• Use a smaller bit

• Withdraw the bit frequently

• Apply more pressure