Which statement about IBE is true?

IBE use public key cryptography as the encryption architecture

Recipients can access their IBE emal without authentication, if they have the sender's public key

Users need to install OpenPGP to read Email.

IBE can be used only when all MTAs are Fortimail

How is the encryption key generated for IBE ?

It is generated from identity elements, such as email addresses

It is generated using a key generator

It is generated using random mouse movements when the email is sent

It is generated from biometric data

Which statement accurately describes the pull delivery method used by IBE ?

Fortimail generates a notification emal message with an embedded HTTPS URL

Fortimail encrypts the confidential data and delivers it as an HTML email message

The client pulls the encrypted message from Fortimail and decrypts it.

Fortimail pulls the encrypted message from the sending MTA

Which is a true statement about the storage of an encrypted message when IBE uses the push delivery method[?

The encrypted message is stored in the recipient's mailbox

The encrypted message is stored on Fortimail

The encrypted message is stored on the sending MTA

The encrypted message is stored in all above locations

How does the built-in bridge handle non-SMTP traffic on Fortimail operating in transparent mode ?

Non-SMTP traffic is bridge through without any inspection

There should be at least one routed interface to allow fortimail to process non-SMTP traffic

Automatically proxies non-SMTP traffic according to firewall rules

Why is it recommended that you run reports during low traffic volumen?

Running reports can be resource intensive

You do this to avoid inaccuracies in the report

Running reports cause the system to reboot

Reports cannot be generated when CPU usage is over 50%

Sender policy framework (SPF) provides protection from forged email identities by performing which action?

comparing the IP address of the sender MTA with a list of approved IP address in the sender domain DNS records

comparing the ip address of the senders MTA with a list of Fortiguard-approved IP addresses in the sender domain DNS records

What is the propose of access delivery control ?

It applies rates to limit outgoing email delivery at the system level

It applies rates to limit excessive incoming emails

What cannot be restricted using with sender address rate control?

Emails with too many recipients

spammers that overwhelm your Fortimail sessions

The amount of data sent through the Fortimail device

An MTA that is sending too many emails

Refer to the exhibits showing SMTP limits (Session Profile — SMTP Limits), and domain settings (Domain Settings, and Domain Settings — Other) of a FortiMail device. Which message size limit in KB will the FortiMail apply to outbound email?

There is no message size limit for outbound email from a protected domain.

A FortiMail device is configured with the protected domain example.com . If none of the senders is authenticated, which two envelope addresses will require an access receive rule? (Choose two.)

MAIL FROM: accounts@example.com RCPT TO: sales@biz.example.com

MAIL FROM: training@example.com RCPT TO: students@external.org

MAIL FROM: support@example.org RCPT TO: marketing@example.com

MAIL FROM: mis@hosted.net RCPT TO: noc@example.com

Refer to the exhibit, which shows a topology diagram of two separate email domains. Which two statements correctly describe how an email message is delivered from User A to User B? (Choose two.)

mx.example1.org will forward the email message to the MX record that has the lowest preference.

User B will retrieve the email message using either POP3 or IMAP.

User A’s MUA will perform a DNS MX record lookup to send the email message.

The DNS server will act as an intermediary MTA.

Refer to the exhibit which shows the output of an email transmission using a telnet session. What are two correct observations about this SMTP session? (Choose two.)

The "Subject" is part of the message header.

The "220 mx.internal.lab ESMTP Smtpd" message is part of the SMTP banner.

The SMTP envelope addresses are different from the message header addresses.

The "250 Message accepted for delivery" message is part of the message body.

Which statement describes the heuristics antispam technique?

It analyzes email using characteristics of known spam samples recently caught by FortiMail.

URIs in the email message body are extracted and sent to third-party rating servers.

It analyzes characteristics of images using depth of color, grey level, space, and color change.

The header and body of email messages are scanned against a set of PCRE rules.

What are two benefits of having authentication reputation tracking enabled on FortiMail? (Choose two.)

Tracks offending IP addresses attempting brute force attacks

Temporarily locks out an attacker

Detects spoofed SMTP header addresses

Refer to the exhibit, which shows a transparent mode FortiMail deployment. Which connection pickup configurations allow FML-1 to scan bidirectional traffic? (Choose two.)

Port2 Incoming connections: Pass through; Port2 Outgoing connections: Proxy

Port1 Incoming connections: Proxy; Port1 Outgoing connections: Pass through

Port2 Incoming connections: Proxy; Port2 Outgoing connections: Proxy

Port1 Incoming connections: Proxy; Port1 Outgoing connections: Proxy

Which two statements about domain keys identified mail (DKIM) on FortiMail are true? (Choose two.)

A private key is used to generate a DKIM signature, which is inserted into the message headers of outbound email.

DNS is queried for the sending domain TXT records, which contain the DKIM public key.

The DKIM public key contains a list of authorized MTAs.

The private key should be shared with any remote MTAs that will participate in DKIM.

Which troubleshooting step should you take when investigating FortiGuard antispam and antivirus update issues?

Confirm that FortiMail can establish outbound connections on port 443.

Use the execute smtptest command to verify email flow.

Use the execute ping command to check connectivity with service.fortiguard.net .

Use one of the alternate service ports, such as 8888 or 8889.

An administrator wants to configure disk quotas for all the users of a specific protected domain on a FortiMail device that is operating in server mode. In which two ways can an administrator meet this requirement? (Choose two.)

Define the disk quota value in a resource profile, and apply it to an incoming recipient policy.

Define the disk quota value in the protected domain-level service setting.

Define the disk quota value in an access profile, and apply it to the affected user accounts.

Define the disk quota value for each user in their respective account settings.

When the domain keys identified mail (DKIM) feature is used, where is the public key stored?

The public key is stored in a DNS server as a TXT record.

The public key is distributed during the SMTP session establishment.

The public key is stored in a DNS server as a PTR record.

The public key is stored in the local FortiMail flash memory.

Refer to the exhibit. Which three statements about the SMTP session shown in the exhibit are true? (Choose three.)

The server accepted the email message for delivery.

The server FQDN is mx.internal.lab.

The client did not authenticate.

mx.internal.lab FQDN resolves to 10.0.1.10.

The session is encrypted using TLS.

Which two statements describe the push delivery method used by IBE? (Choose two.) Select one or more:

FortiMail encrypts the email and adds it to a notification email as an HTML attachment.

Decrypted email is displayed using the HTTPS webmail interface.

The recipient accesses the HTTPS link and logs in to the FortiMail secure message portal.

FortiMail generates a notification email message with an embedded HTTPS URL.

Which three actions does FortiSandbox perform when it is integrated with FortiMail for advanced threat protection (ATP)? (Choose three.)

It assigns and returns a rating for analyzed objects.

It updates FortiGuard databases.

It analyzes file and URI objects.

It submits objects for sandbox scanning.

It queues email during analysis.

Which two statements about how FortiMail behaves when using transparent proxies to process email in transparent mode, are true? (Choose two.)

If you disable the transparent proxies, FortiMail will use its built-in MTA to process email.

The inbound proxy supports message queuing and DSNs

The outbound proxy supports DSNs, but not message queuing.

FortiMail ignores the destination set by the sender, and uses its own MX record lookup to deliver email.

How does FortiMail process SMTP sessions, if no access receive rules are configured?

If the RCPT TO domain matches the protected domain, the email will be relayed.

If the destination IP matches the MAIL FROM domain’s MX record, the email will be relayed.

If the source IP matches the RCPT TO domain’s MX record, the email will be relayed.

If the MAIL FROM domain matches the protected domain, the email will be relayed.

What is one advantage of creating domain associations?

It eliminates the need for different recipient-based policies for different protected domains.

It disables FortiMail default relay behavior.

It allows the creation of protected, domain-specific administrator accounts.

It eliminates the need for different DNS MX records for different protected domains.

Which FortiMail feature combats spammers who try to hide spam content in delivery status notifications (DSN) messages?

Bounce address tag validation (BATV)

What are two benefits of enabling the header manipulation feature? (Choose two.)

It hides internal network information.

It reduces overall message size by removing header content.

It detects spoofed SMTP header addresses.

It detects common spamming techniques.

What are two methods of creating fingerprint documents on FortiMail? (Choose two.)

Create a fingerprint source that FortiMail can use to generate fingerprints

Manually upload files to FortiMail

Upload the MD5 checksum value of each file to FortiMail

Manually upload hash files of documents to FortiMail

Refer to the exhibit, which shows the HA configuration of a FortiMail device. Which two steps are the minimum configuration steps required to configure an active-passive cluster? (Choose two.)

In the Shared password field, type the same password that is used for all of the clustered devices.

In the HA mode drop-down list, select Primary .

Add the IP addresses of the secondary devices that will be members of the cluster.

In the HA base port field, change the value to 22000.

What is a mail user agent (MUA)?

Software that end users interact with to retrieve and send email messages

A protocol used to authenticate users for email retrieval

The destination server where user mailboxes are stored

Any SMTP server that processes and forwards email messages, but does not store them

Why should you select the FortiMail operation mode early in the setup process?

When the operation mode is changed, most settings revert to their factory defaults.

If users are configured, the operation mode can be changed only after a factory reset.

The operation mode can be set only by using the quick start wizard.

If a protected domain is configured, the operation mode will be locked at its present value.

Refer to the exhibit, which shows the HA configuration of a FortiMail device.What are the minimum configuration changes required to deploy this FortiMail device as a config-secondary in a config-only cluster? (Choose two.)

In the Shared password field, type the same password as the one configured on the config-primary FortiMail.

In the Primary IP address field, type the config-primary FortiMail IP address.

In the HA base port field, change the value to 8890.

In the HA mode drop-down list, select Secondary .

FORTIMAIL 7.2

Professional Development

•

52 Qs

Similar activities

Digital Marketing 67.02

Professional Development

•

53 Qs

Final Exam Review pt.1

Professional Development

•

54 Qs

Internal Exam Viva

Professional Development

•

50 Qs

MLBB Handbook Quiz

Professional Development

•

50 Qs

Softball

KG - Professional Development

•

50 Qs

GK- Marathon 13,14 & 15

8th Grade - Professional Development

•

50 Qs

REVIEWER APH : OTEP

Professional Development

•

56 Qs

90's-early 00's Trivia

University - Professional Development

•

50 Qs

FORTIMAIL 7.2

Quiz

•

Other

•

Professional Development

•

Practice Problem

•

Easy

•

REVISAR

Standards-aligned

cristian hernandez

Used 5+ times

FREE Resource

52 questions

Show all answers

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Identify the role that Fortisandbox plays when it is integrated with Fortimail for ATP

Analyze the message body contents for viruses

Hold a copy of the email while Fortimail does spam analysis

Trap the attacking Ip address in a sandbox to prevent spam

Analyze the file and URL objects

MULTIPLE SELECT QUESTION

45 sec • 1 pt

What are the two scan modes Fortimail Uses to submit files to FortiSandbox?

submit only

Submit and wait for result

Active scan

Passive scan

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

The Content monitor and filtering feature performs which function?

Detects offensive images in the email body

examines the email header and body for specific words or patterns

examines the mail header and body for offensive images

Detects specific words and patterns in the email body

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

URL click protection is available for which type of content?

Microsoft office

PDF

HTML

VIDEOS

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Why is the DLP feature disable on entry-level Fortimail models?

DLP configuration is disable if you do not have at least two interface

It is disable because of performance considerations

There is no lincense available on entry-level models

Entry-level Fortimail models do not support gateway mode, which is required for DLP

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

what is a method for creating fingerprints on fortimail for DLP ?

Upload files manually

Upload hash values of files

Point to an SSH server to upload and create fingerprints

Specify a Fortiguard DLP server

MULTIPLE SELECT QUESTION

45 sec • 1 pt

In which two locations can you store Fortimail archives ? (choose two)

local disk

fortiloud storage

SFTP server

CFS file share

Create a free account and access millions of resources

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

51 questions

FELE Subtest 1 Comp 1

Quiz

•

Professional Development

50 questions

Health Policy and Planning SPH5223 (test 1)

Quiz

•

University - Professi...

50 questions

MANSOSWAN PPPK

Quiz

•

Professional Development

48 questions

(Prequiz) Installation and Maintenance of IACS

Quiz

•

Professional Development

50 questions

logos

Quiz

•

KG - Professional Dev...

48 questions

RADR 2309 Ch. 6 X-Ray Tube

Quiz

•

Professional Development

50 questions

Microsoft Excel

Quiz

•

Professional Development

50 questions

PRE TEST

Quiz

•

Professional Development

Popular Resources on Wayground

10 questions

Forest Self-Management

Lesson

•

1st - 5th Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

30 questions

Thanksgiving Trivia

Quiz

•

9th - 12th Grade

30 questions

Thanksgiving Trivia

Quiz

•

6th Grade

11 questions

Would You Rather - Thanksgiving

Lesson

•

KG - 12th Grade

48 questions

The Eagle Way

Quiz

•

6th Grade

10 questions

Identifying equations

Quiz

•

KG - University

10 questions

Thanksgiving

Lesson

•

5th - 7th Grade

Discover more resources for Other

20 questions

HS2C2 AB QUIZIZZ

Quiz

•

1st Grade - Professio...

FORTIMAIL 7.2

52 questions

Identify the role that Fortisandbox plays when it is integrated with Fortimail for ATP

What are the two scan modes Fortimail Uses to submit files to FortiSandbox?

The Content monitor and filtering feature performs which function?

URL click protection is available for which type of content?

Why is the DLP feature disable on entry-level Fortimail models?

what is a method for creating fingerprints on fortimail for DLP ?

In which two locations can you store Fortimail archives ? (choose two)

Which management inteface do you use to access archived email on Fortimail?

Which statement about IBE is true?

How is the encryption key generated for IBE ?

Create a free account and access millions of resources

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Other