Refer to the exhibit. An administrator is importing a new device to FortiManager and has selected the options shown in the exhibit. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?

The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted.

The unused objects that are not tied to the firewall policies in the policy package will be deleted from the FortiManager database.

The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate.

The unused objects that are not tied to the firewall policies will be installed on FortiGate.

Push updates are failing on a FortiGate device that is located behind a NAT device. Which two settings should the administrator check? (Choose two.)

That the virtual IP address and correct ports are set on the NAT device

That the NAT device IP address and correct ports are configured on FortiManager

That the override server IP address is set on FortiManager and the NAT device

That the external IP address on the NAT device is set to DHCP and configured with the virtual IP

An administrator has assigned a global policy package with All Policy Packages option selected to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

When a new policy package is created, the administrator must import the global policy package to ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADOM.

When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package.

Refer to the exhibit. Which statement is true about the FortiManager ADOM policy tab based on the API request?

The API command has enabled both central NAT and interface policy on the policy tab.

The API command has requested the policy tab permissions information only.

The API command has failed when requesting policy tab permissions information.

The API command has applied to customer with ID: 200.

An administrator is replacing a failed device on FortiManager by running the following command: execute device replace sn <devname> <serialnum>. Which device name and serial number must the administrator use?

The device name of the failed device and serial number of the new device

The device name of the new device and serial number of the failed device

The device name and serial number of the failed device

The device name and serial number of the new device

Refer to the exhibit. Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two.)

The same administrator can lock more than one ADOM at the same time.

Concurrent read-write access to an ADOM is disabled.

Two or more administrators can make configuration changes at the same time, in the same ADOM.

You can validate administrator login attempts through external servers.

What are two outcomes of ADOM revisions? (Choose two.)*

ADOM revisions can significantly increase the size of the configuration backups.

ADOM revisions can save the current state of the whole ADOM.

ADOM revisions can create System Checkpoints for the FortiManager configuration.

Refer to the exhibit. What is the purpose of setting ADOM Mode to Advanced?

This setting allows you to assign a VDOM from a single device to a different ADOM.

This setting enables the ADOMs feature on FortiManager.

This setting allows you to manage FortiGate chassis models.

This setting disables concurrent ADOM access and adds ADOM locking.

Refer to the exhibit. How will FortiManager try to get updates for antivirus and IPS?

From the configured override server IP address 10.0.1.50 only

From the list of configured override servers or public FDN servers

From the default server fds1.fortinet.com

From public FDNI server IP address with the fourth highest octet only

Refer to the exhibit. Given the configuration shown in the exhibit, what can you conclude from the installation targets in the Install On column? (Choose two.)

Policy seq.# 3 will be installed on all managed devices and VDOMs that are listed under Installation Targets.

Policy seq # 1 will be installed on the Remote-FortiGate root[NAT] and Student[NAT] VDOMs only.

Policy 3 will be installed on all FortiGate devices and vdom belongs to the ADOM.

Policy seq.# 3 will be skipped because no installation targets are specified.

Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target.

What is the advantage of using FortiManager to manage FortiAnalyzer?

It allows FortiManager to run reports based on FortiAnalyzer.

It allows FortiManager to manage all FortiGate devices.

It allows FortiManager to store all managed FortiGate device logs.

It allows FortiManager to act as a collector and FortiAnalyzer device.

Refer to the exhibit. What can you conclude from the failed installation log shown in the exhibit?

Policy ID 2 is installed without the remote user student.

Policy ID 2 will not be installed.

Policy ID 2 is installed in the disabled state.

Policy ID 2 is installed without a source address.

Refer to the exhibit. A junior administrator is troubleshooting a FortiManager connectivity issue that is occurring with managed FortiGate devices. Given the FortiManager device manager settings shown in the exhibit, what can you conclude from the exhibit?

The administrator had restored the FortiManager configuration file.

FortiManager lost internet connectivity, therefore, both devices appear to be down.

The administrator must refresh both devices to restore connectivity.

The administrator can reclaim the FGFM tunnel to get both devices online.

Refer to the exhibit. An administrator logs in to the FortiManager GUI and sees the panes shown in the exhibit. Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)

FortiAnalyzer features are not enabled on FortiManager.

The administrator workflow is enabled on the ADOM.

The admin session requires approval before administrator can see the FortiAnalyzer feature panes.

The administrator profile does not have full access privileges like the Super_User profile.

An administrator runs the Policy Check feature on FortiManager ADOM. What will be the result?

It will find and provide recommendations to combine multiple separate policy packages into one common policy package.

It will find and merge duplicate policies in the policy package.

It will find and provide recommendations for optimizing policies in a policy package.

It will find and delete disabled firewall policies in the policy package.

Refer to the exhibit. What will happen if the script is run using the Remote FortiGate Directly (via CLI) option? (Choose two.)

FortiManager will create a new revision history.

FortiGate will auto-update the FortiManager device-level database.

FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate.

You must install these changes using the Install Wizard.

Refer to the exhibit. Given the configuration shown in the exhibit, how did FortiManager handle the service category named General?

FortiManager ignored the firewall service category General and did not update its database with the value.

FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database.

FortiManager ignored the firewall service category General and deleted the duplicate value in its database.

FortiManager ignored the firewall service category General but created a new service category in its database.

Refer to the exhibit showing a Download Import Report. Why is it failing to import firewall policy ID 1?

The address object used in policy ID 1 already exists in the ADOM database with any as the interface association, and conflicts with the address object interface association locally on FortiGate.

Policy ID 1 for this managed FortiGate already exists on FortiManager in the policy package named Remote-FortiGate.

Policy ID 1 is configured from the interface any to port6. FortiManager rejects the request to import this policy because the any interface does not exist on FortiManager.

Policy ID 1 does not have the ADOM Interface mapping configured on FortiManager.

What does a policy package status of Never Installed indicate?*

The policy package was never imported after a device was registered on FortiManager.

The policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager.

FortiManager is unable to determine the policy package status.

The policy configuration has been changed on FortiManager and changes have not yet been installed on the managed device.

Refer to the exhibit. An administrator is about to add the FortiGate device to FortiManager using the discovery process. FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings. What is the expected result?

During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.

During discovery, FortiManager uses only the FortiGate serial number to establish the connection.

During discovery, FortiManager sets the NATed device IP address on FortiGate.

During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.

What will be the result of reverting to a previous revision version in the revision history?

It will modify the device-level database.

It will generate a new version ID and remove all other revision history versions.

It will install configuration changes to managed device automatically.

It will tag the device settings status as Auto-Update.

In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices only. The administrator authorized the FortiGate device on FortiManager using the Fortinet Security Fabric. Given the administrator’s actions, which statement correctly describes the expected result?

The authorized FortiGate will appear in the root ADOM.

The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only.

The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors.

The authorized FortiGate will be automatically added to the Training ADOM.

Refer to the exhibit. Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two.)

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out.

The same administrator can lock more than one ADOM at the same time.

Unlocking an ADOM will submit configuration changes automatically to the approval administrator.

Unlocking an ADOM will install configuration changes automatically on managed devices.

NSE5 - FortiManager 7.2 (2)

Authored by Rafael Paixão

others

Professional Development

Used 1+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View
Student View

33 questions

Show all answers

MULTIPLE CHOICE QUESTION

30 sec • 2 pts

You are moving managed FortiGate devices from one ADOM to a new ADOM. Which statement correctly describes the expected result?

The shared device settings will be installed automatically.

Any unused objects from a previous ADOM are moved to the new ADOM automatically.

The shared policy package will not be moved to the new ADOM.

Policy packages will be imported into the new ADOM automatically.

MULTIPLE CHOICE QUESTION

30 sec • 2 pts

What is the purpose of ADOM revisions?*

To save the FortiManager configuration in the System Checkpoints

To revert individual policy packages and device-level settings for a managed FortiGate

To save the current state of the whole ADOM

To save the current state of all policy packages and objects for an ADOM

MULTIPLE SELECT QUESTION

30 sec • 2 pts

Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

It can be configured using the CLI and GUI.

It does not back up firmware images saved on FortiManager.

It backs up all devices and the FortiGuard database.

It supports FTP, SCP, and SFTP.

MULTIPLE CHOICE QUESTION

30 sec • 2 pts

An administrator has enabled Service Access on FortiManager. What is the purpose of Service Access on the FortiManager interface?

It allows administrative access to FortiManager.

It allows FortiManager to determine the connection status of managed devices.

It allows third-party applications to gain read/write access to FortiManager.

It allows FortiManager to respond to requests for FortiGuard services from FortiGate devices.

MULTIPLE SELECT QUESTION

30 sec • 2 pts

Refer to the exhibit. If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FGFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management.

MULTIPLE SELECT QUESTION

30 sec • 2 pts

Refer to the exhibit. An administrator would like to create three ADOMs on FortiManager with different access levels based on departments. What two conclusions can you draw from the design shown in the exhibit? (Choose two.)*

Admin A can access VDOM2 and VDOM3 with the super user profile.

The FortiManager policies and objects database can be shared between the Financial and HR ADOMs.

The administrator must set the FortiManager ADOM mode to Advanced.

The administrator must configure FortiManager in workspace mode.

MULTIPLE CHOICE QUESTION

30 sec • 2 pts

Refer to the exhibit. According to the error message, why is FortiManager failing to add the FortiAnalyzer device?

The administrator must use the correct user name and password of the FortiAnalyzer device.

The administrator must turn off the Use Legacy Device login and add the FortiAnalyzer device to the same network as FortiManager.

The administrator must use the Add Model Device section and discover the FortiAnalyzer device.

The administrator must select the FortiManager administrative access checkbox on the FortiAnalyzer management interface.

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Microsoft

or continue with

Facebook

Apple

Others

By signing up, you agree to our Terms of Service & Privacy Policy

Already have an account?

Similar Resources on Wayground

30 questions

ECT ACS-III FOR CS & VRAR

Quiz

•

Professional Development

30 questions

Final Examination REA Kaltim

Quiz

•

Professional Development

Popular Resources on Wayground

10 questions

Ice Breaker Trivia: Food from Around the World

Quiz

•

3rd - 12th Grade

21 questions

Continents and Oceans

Quiz

•

6th Grade

20 questions

Parts of Speech

Quiz

•

5th Grade

16 questions

Subject & Predicate

Quiz

•

5th Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

7 questions

Copy of How to Report Bullying 6-12 Grade - Bullying Lesson Series 3

Presentation

•

2nd Grade

12 questions

Map Skills

Quiz

•

3rd Grade

22 questions

Continents and Oceans

Quiz

•

5th Grade

Discover more resources for others

10 questions

How to Email your Teacher

Quiz

•

Professional Development

10 questions

Halloween Trivia

Quiz

•

Professional Development

18 questions

Hispanic Heritage Flags

Quiz

•

KG - Professional Dev...

25 questions

2023 Pop Culture Trivia

Quiz

•

Professional Development

20 questions

Block Buster Movies

Quiz

•

10th Grade - Professi...