Modules 1 – 4: Switching Concepts, VLANs, and InterVLAN (PART 2)

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# ip address 172.18.33.88 255.255.255.0 command?

• • It applies an IPv4 address to the virtual interface.

• • It applies an IPv6 address to the virtual interface.

• It activates a virtual or physical switch interface

• • It permits an IPv6 address to be configured on a switch physical interface.

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw# configure terminal command?

• It enters the global configuration mode

• It enters configuration mode for a switch virtual interface

• It applies an IPv4 address to the virtual interface

• It updates the MAC address table for the associated port

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw# configure terminal command?

• It saves the running configuration to NVRAM

• It enters the global configuration mode

• It disables a virtual or physical switch interface

• It updates the MAC address table for the associated port

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# shutdown command?

• It saves the running configuration to NVRAM

• It activates a virtual or physical switch interface

• It disables a virtual or physical switch interface

• It updates the MAC address table for the associated port

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# shutdown command?

• It permits an IPv6 address to be configured on a switch physical interface

• It applies an IPv4 address to the virtual interface

• It applies an IPv6 address to the virtual interface

• It disables a virtual or physical switch interface

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# ipv6 address 2001:db8:a2b4:88::1/64 command?

• It activates a virtual or physical switch interface

• It applies an IPv6 address to the virtual interface

• It applies an IPv4 address to the virtual interface

• It permits an IPv6 address to be configured on a switch physical interface

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# exit command?

• It returns to privileged mode

• It configures the default gateway for the switch

• It returns to global configuration mode

• It enters user mode

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw> enable command?

• It updates the MAC address table for the associated port

• It enters configuration mode for a switch virtual interface

• It enters the global configuration mode

• It enters privileged mode

A technician is configuring a new Cisco 2960 switch. What is the effect of issuing the BranchSw(config-if)# duplex full command?

• • It allows data to flow in only one direction at a time on the interface

• It allows data to flow in both directions at the same time on the interface

• It automatically adjusts the port to allow device connections to use either a straight-through or a crossover cable

• It configures the switch as the default gateway

What type of VLAN should not carry voice and network management traffic?

• • security VLAN

• • management VLAN

• • voice VLAN

• • data VLAN