CSS 11 Q1 T4 Disassemble/Assemble and T5 BIOS

What is the first step in performing computer disassembly?

• A. Remove the right side panel facing the back panel ports.
• B. Disconnect the System Fan Connector from the Motherboard and remove it from the System Unit.
• C. Remove all cables (SATA, IDE, etc.) and connectors (Front Panel, etc.) from the Motherboard to the components.
• D. Disconnect connectors from Power Supply from the Motherboard and other components. (ATX Power Connector and etc.).

What is the first step in performing computer assembly?

• A. Insert CPU on the CPU Slot.
• B. Put back the CPU Fan and Heatsink.
• C. Insert RAM and CMOS Battery on the Motherboard.
• D. Put the components (HDD, FDD, ODD, etc.) and screw it in the case.

When removing parts from a PC while under repair, it is best to lay them on _____________ and/or if removing a bare Hard Disk Drive (HDD) from one location to another, place it in _____________.

• A. A smooth surface, a protective box.
• B. An anti-static mat, an anti-static bag.
• C. An anti-static mat, a secure container.
• D. The desk while your wrist strap is on, a static-free container.

While turning on the system unit, you heard 3 short beeps from the AMI BIOS Power On Self-Test. The following are the steps on how to troubleshoot it, EXCEPT one. Which is it?

• A. Remove added/Replace memory.
• B. Swap memory location.
• C. Try know-working memory from a separate computer.
• D. Try different keyboard on the computer.

In what way you will insert the Random Access Memory (RAM) to the Memory Card Slot?

• A. Using one thumb, push the lever side wards and upwards.
• B. Using one thumb, press the clamp for the RAM to be removed.
• C. Using two thumbs, carefully push the both sides of the RAM card with equal force until the locking tabs will fix it in place.
• D. Using two thumbs, push side wards both locking tabs simultaneously for the RAM to be removed.

Why should you disconnect the connectors from the Power Supply Unit (PSU) before removing the PSU from the System Unit? The following are reasons EXCEPT.

• A. To maximize the risk of data loss or corruption.
• B. To avoid interference with other internal components.
• C. To eliminate any power draw on the PSU during removal.
• D. To prevent accidental short circuits while handling the PSU.

How would you prove that following proper procedure in assembling the computer is important?

• A. It prioritizes high-speed performance and minimal latency.
• B. It complies with regulatory standards and legal requirements.
• C. It ensures efficient energy consumption and reduce electricity bills.
• D. It prevents accidental damage to computer peripherals and components.

When assembling a computer, which of the following steps is crucial to ensure proper thermal management and prevent overheating?

• A. Securing all cables and wires with cable ties.
• B. Installing additional case fans for improved airflow.
• C. Installing a liquid cooling system for efficient cooling.
• D. Applying thermal paste between the CPU and the heatsink.

If refers to firmware interface designed as a replacement for BIOS - Compatibility Support Module (CSM) / Legacy?

• A. Advanced Configuration and Power Interface (ACPI)
• B. Complementary Metal-Oxide Semiconductor (CMOS)
• C. Graphic User Interface (GUI)
• D. Unified Extensible Firmware Interface (UEFI)

The BIOS is a firmware already installed at which component in the system unit?

• A. Bootable USB Flash Drive
• B. Hard Disk Drive (HDD)
• C. Non-volatile Memory Chip on the Motherboard.
• D. Random Access Memory (RAM)