Helicopter Safety and Operations Quiz

__________ hard points are used for the purpose of helicopter jacking

• Three

• Four

• Five

Below is the safety precaution need to be observed during helicopter jacking, EXCEPT,

• Make sure all persons not necessary for the procedures are clear of the helicopter

• Put ropes around the work area and put the jack warning signs at four ends

• One person must be inside the helicopter to control the brakes

Slinging the helicopter can be achieved by securing the sling at _________

• Main rotor head

• MGB Upper module

• Main rotor mast

The helicopter must be weighed when one of the following conditions exist: -

• When the minor modifications or repairs are made

• When the basic weight is suspected to be an error

• When the helicopter involved in hard landing

All equipment installed on the helicopter can be found in which document?

• Chart A

• Chart B

• Chart C

Weight of the helicopter with standard operational equipment, with full operating fluids (engine oil, gearbox oil, hydraulic oil) and unusable fuel also known as,

• Operating Weight

• Gross Weight

• Basic Empty Weight

Leveling the helicopter for weighing purposes can be achieved by

• Put a digital level on the MGB anti-torque beam

• Place the inclinometer on the pilot's floor

• Position the plumb bob in the baggage compartment

__________ jacking point are used for Helicopter Weighing purposes.

• Three

• Four

• Five

The maximum gross weight for towing or taxi?

• 8350 KG

• 8450 KG

• 8550 KG

Safety precautions need to be observed prior to towing as per below, EXCEPT

• One person with two chocks is in position adjacent to each main wheel

• Rotate the nose wheel center lock level to lateral position (clockwise) to disengage the nose center lock pin

• One person sitting in the cockpit to release and apply the parking brake