If you notice rust on needle-nose pliers, what should you do before storing them?

Clean them and check tip alignment

Sharpen the tips to remove the rust

Replace the tool with a new one

Store them in a foam-padded drawer

In which situation is a soldering iron most appropriately used?

Joining metal parts by applying heat

Tightening screws on the motherboard

Organizing small screws during repair

Securing hard drives using screws

What combination of tools would be used to install new RAM?

Needle-nose pliers and Phillips-head screwdriver

Flat-head screwdriver and soldering iron

Torx screwdriver and side cutter pliers

What could happen if the tip of a Torx screwdriver is worn down?

It may damage the screws it handles

It will increase grip on screws

It will fit perfectly into the screws

It will prevent over-tightening of screws

What distinguishes a Phillips-head screwdriver from a flat-head screwdriver?

Phillips-head works with positive slots

Flat-head is used for star-shaped screws

Flat-head is for positive slotted screws

Phillips-head has a hexagonal screw slot

What is the best method to store a flat-head screwdriver?

In a designated drawer with padding

Inside a box with other hand tools

In a magnetic strip by the workbench

What is the main purpose of a Phillips-head screwdriver?

To drive positive slotted screws

What is the most likely result of not cleaning the soldering iron tip before storage?

It will oxidize and reduce efficiency

It will heat up slower next time

It will become electrically charged

What is the purpose of labeling tool storage compartments?

To make identification and retrieval easier

To prevent tools from being stolen

To remind users of the tool's function

To ensure that all tools are clean

What is the significance of using compressed air in computer cleaning?

It removes dust from delicate areas safely

It heats and melts solder for electrical work

It tightens screws in hard-to-reach areas

It organizes small components into labeled sections

What should you do before storing a Phillips-head screwdriver?

Ensure the tip is free of debris

Clean the blade with a damp cloth

What would be the best way to store compressed air for cleaning tools?

Near windows for better airflow

Next to other tools on a workbench

When tightening a screw in a computer casing, what tool should you use?

Flat-head screwdriver for slotted screws

Hex driver to ensure tight fitting

Needle-nose pliers to grip the screw

Side cutter pliers for cutting the wire

Which factor is most important when storing long nose pliers in a drawer?

Having foam padding in the drawer

Organizing tools by their size and use

Keeping the handles away from moisture

Ensuring they are not stored with sharp tools

Which factor should you prioritize when deciding where to store soldering tools?

The safety of children and pets around tools

Temperature and humidity of the storage area

The ease of accessibility during projects

The amount of space available for all tools

Which hand tool would be most effective for assembling hard drives in a computer?

Hex driver for hexagonal screws

Torx screwdriver for star-shaped screws

Side cutter pliers for trimming wires

Which storage method should you use for a soldering iron that is still hot?

Keep it in a soldering stand immediately

Store in a drawer after cooling

Why is a Torx screwdriver necessary in some laptop repairs?

It tightens star-shaped screws.

It loosens cross-headed screws.

It tightens or loosens flat screws.

It holds small electronic parts.

Why is a Torx screwdriver used in computer servicing?

It drives screws with a star-shaped pattern

It is designed for use with positive screws

It cuts through small metal parts

It grips and bends electrical wires

Why is it a good idea to inspect cutting edges before storing side cutter pliers?

To ensure they are sharp and aligned properly

To decide whether the tool is still usable

To determine if they need to be replaced

To ensure the cutting edges don’t dull in storage

Why is it important to store hand tools properly?

To prevent rust and make them last longer

So they are easy to find in an emergency

To avoid losing expensive equipment

To ensure children cannot access them

Why should soldering lead and flux be stored in airtight containers?

To avoid mix-ups and contamination

To protect them from moisture damage

To ensure they stay at room temperature

To keep them safe from electrical currents

Why would you use a parts organizer during a computer repair?

To prevent losing screws and small components

To hold the soldering iron in place safely

To remove dust from sensitive electronic parts

To grip small wires and connectors effectively

CSS11-2Q-ST1

Authored by Jelly Bean

Computers

11th Grade

Used 1+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

40 questions

Show all answers

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

13. Which tool is most suitable for diagnosing a faulty power supply?

Loopback adapter

Power supply tester

Multimeter

Memory tester

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

A technician observes frequent crashes in a computer. What tool is likely most appropriate to check the issue?

Compressed air

Loopback adapter

Multimeter

Memory tester

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

How do you ensure a secure connection when soldering two wires together?

Use flux before applying the solder

Cut wires using side cutter pliers

Twist the wires with needle-nose pliers

Use compressed air to blow away excess solder

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

How does a memory tester assist technicians?

It measures power supply voltage.

It diagnoses RAM for errors.

It tests network connectivity.

It cleans the memory components.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

How does a soldering iron function when joining components?

By driving screws into metal parts

By heating up solder to form connections

By tightening screws in electronic parts

By cutting wires for electrical connections

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

How does using a magnetic strip help store screwdrivers effectively?

It keeps them organized for easy access

It prevents the tips from becoming dull

It prevents rust buildup on metal parts

It keeps the handles from bending

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

If a computer is overheating, which tool would be most effective in cleaning the fan?

Torx screwdriver

Compressed air

Multimeter

Side cutter pliers

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

54 questions

Analyzing Line Graphs & Tables

Quiz

•

4th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

Discover more resources for Computers

18 questions

[AP CSP] JavaScript Programming Lesson 2025-2026

Lesson

•

9th - 12th Grade

57 questions

[AP CSP] Unit 5 Review: Internet & Cybersecurity

Quiz

•

9th - 12th Grade