Shingle Installation

What tool is used to cut the drip edge?

• Utility knife

• Tin snips

• Hacksaw

• Circular saw

How far up the rake should the drip edge extend?

• 1 inch

• 2 inches

• 3 inches

• 4 inches

Where is the drip edge nailed to the roof deck?

• Every 12 inches

• Every 18 inches

• Every 24 inches

• Every 36 inches

What is the main safety concern when working with building paper?

• It tears easily

• It is slippery

• It melts in the sun

• It is too heavy

How far apart should nails be placed along the edges of the building paper?

• 6 inches

• 12 inches

• 18 inches

• 24 inches

Where is the rake drip edge installed relative to the building paper?

• Under it

• On top of it

• Parallel to it

• Perpendicular to it

How should the building paper be cut before installing the rake drip edge?

• 1 inch beyond the fascia

• Flush with the fascia board

• Overlapping the fascia board

• At a 45-degree angle

How far apart are horizontal alignment marks placed on the building paper?

• 6 inches

• 9 inches

• 12 inches

• 15 inches

What is the purpose of starter strips?

• To secure the building paper

• To prevent water leakage at the eave edge

• To protect the fascia board

• To reduce roof weight

How much overhang should the starter strip have over the drip edge?

• 1/4 inch

• 3/8 inch

• 1/2 inch

• 3/4 inch