cisco 2

Refer to the exhibit. Which address or addresses represent the inside global address?

• • 192.168.0.100

• • 10.1.1.2

• • any address in the 10.1.1.0 network

• 209.165.20.25

Which two IPsec protocols are used to provide data integrity?

• MD5

• • DH

• • AES

• SHA

• • RSA

If an outside host does not have the Cisco AnyConnect client preinstalled, how would the host gain access to the client image?

• • The Cisco AnyConnect client is installed by default on most major operating systems.

• The host initiates a clientless VPN connection using a compliant web browser to download the client.

• • The host initiates a clientless connection to a TFTP server to download the client.

• • The host initiates a clientless connection to an FTP server to download the client.

A company is considering updating the campus WAN connection. Which two WAN options are examples of the private WAN architecture? (Choose two.)

• leased line

• • cable

• • digital subscriber line

• Ethernet WAN

• • municipal Wi-Fi

Which type of QoS marking is applied to Ethernet frames?

• • IP precedence

• • DSCP

• • ToS

• CoS

Refer to the exhibit. Routers R1 and R2 are connected via a serial link. One router is configured as the NTP master, and the other is an NTP client. Which two pieces of information can be obtained from the partial output of the show ntp associations detail command on R2? (Choose two.)

• Both routers are configured to use NTPv2.

• Router R1 is the master, and R2 is the client

• • The IP address of R2 is 192 168.1.2.

• • Router R2 is the master, and R1 is the client

• • The IP address of R1 is 192.168.1.2

Refer to the exhibit. The network administrator that has the IP address of 10.0.70.23/25 needs to have access to the corporate FTP server (10.0.54.5/28). The FTP server is also a web server that is accessible to all internal employees on networks within the 10.x.x.x address. No other traffic should be allowed to this server. Which extended ACL would be used to filter this traffic, and how would this ACL be applied? (Choose two.)

R1(config)# interface s0/0/0
R1(config-if)# ip access-group 105 out
R2(config)# interface gi0/0
R2(config-if)# ip access-group 105 in

• access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 20

• access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 21

• access-list 105 permit tcp 10.0.0.0 0.255.255.255 host 10.0.54.5 eq www

• access-list 105 deny ip any host 10.0.54.5

• access-list 105 permit ip any any

Refer to the exhibit. If the network administrator created a standard ACL that allows only devices that connect to the R2 G0/0 network access to the devices on the R1 G0/1 interface, how should the ACL be applied?

• • inbound on the R2 G0/0 interface

• outbound on the R1 G0/1 interface

• • inbound on the R1 G0/1 interface

• • outbound on the R2 S0/0/1 interface

Which is a characteristic of a Type 2 hypervisor?​

• does not require management console software

• • has direct access to server hardware resources

• • best suited for enterprise environments

• • installs directly on hardware

What are the two types of VPN connections? (Choose two.)

• • PPPoE

• • Frame Relay

• site-to-site

• remote access

• • leased line