TestOut PC Pro - 8.8 Windows Boot Errors

Which of the following actions occur during the Pre-EFI Initialization (PEI) stage of the UEFI boot process? (Select two.)

• Device drivers are loaded into memory.

• Power is supplied to the CPU.

• The EFI boot manager initializes.

• System memory is initialized, verified, and allocated.

• The CPU and chipset are verified and fully initialized.

Which option is the first process that runs once a computer is powered on and the CPU loads the BIOS?

• POST

• Boot Loader

• WININIT

• Winload.exe

Rodney, an employee in the Research Department, reports that he is experiencing blue screen errors while using his Windows computer. You ask Rodney if anything has changed on the computer recently. Rodney explains that he recently installed a TV tuner board in an expansion slot, and now he has to reboot the computer every time he loads the TV tuner application to watch TV. You need to fix Rodney's computer and prevent him from using the TV until you can install an updated driver. What should you do?

• Boot the system from a Windows installation disc and select the Startup Repair option.

• Boot the system in Safe Mode. Disable the TV tuner driver in Device Manager.

• Use the Reset This PC option in the Settings app.

• Re-install Windows from the installation disc.

• Reboot the system and select Safe Mode. Edit the properties of the TV tuner driver in Device Manager and select Roll Back Driver.

You have been troubleshooting startup errors on your Windows 11 computer by undoing recent changes, such as rolling back device drivers for a local printer and new graphics card while in Safe Mode. However, the changes you are making are not resolving the startup errors. Which of the following steps will MOST likely help you to find the specific cause of the error without the need to re-install Windows?

• Disable automatic restart on system failure.

• Launch and use the utilities provided in the Recovery Environment.

• Disable Driver Signature Enforcement.

• Disable and then enable devices and services one by one.

You have booted your Windows workstation in Safe Mode and enabled boot logging. To which log file is the boot logging information now written?

• Bootlog.txt

• Nbtlog.txt

• Myboot.txt

• Boot.log

You experience startup errors after you install a new device. What should you do FIRST to resolve the issue?

• A) Boot in Safe Mode and roll back the driver.

• B) Disable automatic restart.

• C) Boot in Safe Mode and disable all unnecessary devices.

• D) Recover the system image.

Marcus was attempting to edit some registry settings on his Windows 11 system. Now, when he tries to boot his system, it hangs after the Windows splash screen is displayed.

Because he cannot boot to Safe Mode, he boots the system from the Windows installation disc and accesses the Recovery Environment. Which Recovery option should Marcus use FIRST to help resolve his boot issue?

• Use BOOTMGR

• Reset this PC

• Go Back to the Previous Build

• System Restore

You are troubleshooting a Windows 11 system that won't boot. The system appears to initialize just fine, and POST completes correctly.

However, Windows does not load, and an error message is displayed on the screen, indicating that the operating system is not found. You determine that the Master Boot Record (MBR) is corrupt. To fix the issue, you perform the following steps:

1. 1) Boot the system from the Windows 11 installation DVD.

2. 2) Access the Recovery Environment.

3. 3) Open a Command Prompt window.

4. Enter the command that you should run at the Command Prompt to address this issue.

• bootrec /fixmbr

• chkdsk /f

• sfc /scannow

• diskpart

Your Windows 11 system powers on, but there is no image on your display. You have not installed a new video card, and have already checked to make sure that the monitor is connected properly to the computer, is plugged in, and is turned on. Which of the following is the BEST next step you should take to try to resolve the issue?

• Check the motherboard documentation for information on beeps.

• Use System Restore from Safe Mode to select a working restore point.

• Boot the system from the installation disc and repair the system.

• Verify that the BIOS/UEFI is configured to use the correct video adapter.

Your system hangs immediately after the BIOS information is shown and displays an error loading operating system error message. What is the MOST likely source of the problem?

• Corrupt MBR or partition table

• Inaccessible boot disk

• Missing or corrupt file

• Corrupt boot sector