Basic Measurement

Dimensional measurement determines physical dimensions such as __________.

• Width, height, and depth

• Volume

• Time

• Gallons

Tags

CCSS.2.MD.A.3

Flatness is an important geometric feature of what measurement component?

• Fixture

• Part to be measured

• Caliper

• Reference Plane

Tags

CCSS.4.MD.A.1

Two systems of dimensional measurement used in manufacturing are the SI Metric System and the __________.

• Decimal inch system

• Fractional inch system

• US customary system

• Manufacturing specifications board

A __________ has its graduations engraved so that they can not be rubbed off.

• Machinist's rule

• Tape measure

• Dial indicator

• Digital caliper

Tags

CCSS.2.MD.A.3

The first step in dimensional measuring is to align the end of the rule where the zero is located with one edge of the dimension you want to measure. This edge is called the __________.

• Measuring point

• Reference point

• Delta point

• All of the above

Tags

CCSS.2.MD.A.3

The measurement of a 5.000 inch part, with an instrument having __________ accuracy, should range from 4.998 - 5.002 inches.

• ±0.001

• ±0.002

• ±0.003

• ±0.004

Tags

CCSS.2.MD.A.3

Resolution is sometimes called __________.

• Instrument error

• Observational error

• Discrimination

• Rpm

Tags

CCSS.RI.9-10.4

CCSS.RI.9-10.4

CCSS.RI.11-12.4

CCSS.RI.7.4

CCSS.RI.8.4

A common decimal inch rule graduation is in __________.

• 8ths

• 16ths

• 50ths

• All of the above

Tags

CCSS.2.MD.A.3

A common fractional inch rule graduation is in __________.

• 10ths

• 32nds

• 50ths

• All of the above

Tags

CCSS.2.MD.A.3

A scale typically found on a machinist rule is __________.

• 1/46

• 1/23

• 1/18

• 1/16

Tags

CCSS.7.RP.A.2C