Engine

Pushes coolant from the radiator through the coolant system, into the engine and back around to the radiator

• Coolant

• Radiator

• Gearbox

• Water Pump

Tags

NGSS.MS-PS3-3

NGSS.MS-PS3-4

Used to connect and synchronize the rotation between two shaft systems.

• Crankshaft

• Camshaft

• Timing Belt Pulley

• Water Pump

Tags

NGSS.MS-PS2-1

It is bolted to the engine and is located in the bottom section of the engine block.

• Oil Pan

• Drain Bolt

• Oil Pan Gasket

• Spark Plug

Seals the connection between the manifold and cylinder head

• Intake Manifold

• Exhaust Manifold

• Intake Manifold Gasket

• Exhaust Manifold Gasket

Part of the engine's timing system used to control the speed of the camshaft, the timing belt component that controls the poppet valves responsible for the exhaust and intake of air in the cylinders.

• Camshaft Pullet

• Crankshaft Pulley

• Water Pump

• Carburetor

Tags

NGSS.MS-PS2-1

Is a filter designed to remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil.

• Oil Pan

• Oil Filter

• Oil Reservior

• AirFilter

Tags

NGSS.MS-ETS1-1

NGSS.MS-ETS1-2

NGSS.MS-ETS1-3

Where is the reaction force produced by the high speed jet seen?

• In the centre of the engine

• At the front of the engine

• At the tail of the engine

• Equally around the circumference of the engine

Tags

NGSS.HS-PS2-1

If you heat the incoming air to a very high temperature it will

• Form a catalyst with the fuel to produce a high velocity jet

• Decrease in volume to produce a high velocity jet

• Turn to a liquid to produce a high velocity jet

• Expand tremendously to produce a high velocity jet

Tags

NGSS.MS-PS1-4

In what form is the fuel burnt in the combustion chamber?

• Magnetised

• Atomised

• Energised

• Sterilised

What is used inside the engine to bring the incoming air to the correct condition?

• Condenser Stages

• Co-Axial Stages

• Compensator Stages

• Compressor Stages