Locking the bed wheels is important because:

it prevents the bed from moving unexpectedly.

it makes the bed more comfortable.

it helps in cleaning the floor.

The process of using a draw sheet to move a resident involves:

Pulling the draw sheet to slide the resident

Lifting the resident without assistance

Rolling the resident onto the draw sheet

The purpose of placing the call light within the resident's reach is to:

ensure the resident can call for help when needed

Why is it important to document the procedure using facility guidelines?

To ensure consistency and compliance

To make the document look professional

To increase the length of the document

To avoid using other guidelines

Explain the procedure to the resident. Why is it important to maintain face-to-face contact whenever possible?

To ensure clear communication and understanding

Adjust the bed to a safe level, usually waist high. Why is it important to lock the bed wheels?

To prevent the bed from moving unexpectedly

To make the bed more comfortable

To adjust the height of the bed

To change the bed's position easily

What does this position the resident for?

Move the resident to the side of the bed near you, using the previous procedure.

Help the resident sit up in bed.

Prepare the resident for a transfer to a wheelchair.

Assist the resident in lying down comfortably.

Raise the far side rail (if used). Why is this step important?

To ensure safety by preventing falls

To allow easy access to the patient

The purpose of this step when turning a resident away from you is to:

make the task easier for the caregiver

align the resident's body properly

prevent the resident from falling

Place one hand on the resident’s near shoulder. Place the other hand on the near hip. What is the next step in turning a resident away from you?

Gently roll the resident away from you.

Lift the resident's leg closest to you.

Move the resident's arm across their chest.

While supporting the body, gently roll the resident onto his side as one unit, toward the raised side rail. Why is it important to use your body to block the resident from rolling out of bed?

To prevent the resident from falling out of bed

To make the resident comfortable

To assist in lifting the resident

To ensure proper alignment of the resident's body

What should be used to support the resident's head?

Position the resident properly.

Return the bed to its lowest position. Why should side rails be left in the ordered position?

To comply with hospital regulations

What does this allow the resident to do?

This allows the resident to easily call for assistance when needed.

This allows the resident to adjust the room temperature.

This allows the resident to lock the door remotely.

This allows the resident to turn off the lights.

Wash your hands. Why is this step important?

To prevent the spread of germs and maintain hygiene.

The purpose of logrolling a resident is to:

ensure the resident's comfort and safety during movement

increase the resident's heart rate

improve the resident's digestion

enhance the resident's cognitive abilities

Identify yourself by name. Identify the resident according to facility policy. Why is this step important?

To ensure proper identification and safety

To comply with legal requirements

To avoid unnecessary communication

Why is it important to adjust the bed to a safe level and lock the bed wheels before logrolling a resident?

To ensure the resident's safety and prevent falls

To make it easier for the caregiver to move around

To comply with hospital regulations

To save time during the procedure

What is the correct position for standing while preparing to logroll a resident?

Standing at the side of the resident

Standing at the head of the resident

Standing at the foot of the resident

What should be done after repositioning the resident comfortably?

Ask the resident if they need anything else

Identify yourself by name. Identify the resident according to facility policy. Why is this important?

To ensure proper identification and safety

Why is it important to wash your hands before assisting a resident?

To prevent the spread of germs and infections

Explain the procedure to the resident. Why should you speak clearly, slowly, and directly?

To ensure the resident understands the procedure

To make the procedure more complicated

Providing for the resident’s privacy with a curtain, screen, or door is necessary because:

it ensures comfort and dignity.

it helps in temperature control.

Adjust the bed to its lowest position. Why is this step important?

To ensure safety during patient transfer

To improve the aesthetic appearance of the room

To make it easier to clean under the bed

To reduce noise levels in the room

Place one arm under the resident’s shoulder blades. Place the other arm under the resident’s thighs. Why is this positioning important?

To ensure comfort and safety during transfer

To make it easier to lift the resident

To prevent injury to the caregiver

To maintain the resident's dignity

On the count of three, slowly move the resident into sitting position with his legs dangling over the side of the bed. Why is this communication important?

To ensure the resident is aware and prepared for the movement

To ensure the resident remains asleep

Ask the resident to sit up straight and hold onto the edge of the mattress with both hands. Why is this step necessary?

To ensure stability and prevent falling

To make the resident comfortable

Gently assist the resident back into bed. Why is it important to place one arm around his shoulders and the other under his knees?

To ensure comfort and safety during the transfer

To avoid using too much strength

To prevent the resident from falling asleep

What should you do to ensure the resident's safety when leaving the bed?

Leave the bed in its lowest position

Moving and Positioning a Resident

Authored by Latosha Anderson

Others

Professional Development

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

61 questions

Show all answers

OPEN ENDED QUESTION

3 mins • 1 pt

What is the first step in moving a resident to the side of the bed?

Evaluate responses using AI:

OFF

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

It is important to identify yourself by name to the resident because:

it helps build trust and rapport.

it is a legal requirement.

it is a hospital policy.

it prevents misunderstandings.

OPEN ENDED QUESTION

3 mins • 1 pt

What should you do after identifying yourself to the resident?

Evaluate responses using AI:

OFF

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Explain the importance of washing your hands before moving a resident.

To prevent the spread of infection

To make the resident feel comfortable

To follow hospital protocol

To save time

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

The purpose of explaining the procedure to the resident is to:

ensure understanding and consent

comply with legal requirements

improve communication skills

fulfill job responsibilities

OPEN ENDED QUESTION

3 mins • 1 pt

How can you provide privacy for the resident?

Evaluate responses using AI:

OFF

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What should you adjust to a safe level before moving a resident?

Bed height

Room temperature

Lighting

Noise level

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Microsoft

or continue with

Facebook

Apple

Others

Already have an account?

Similar Resources on Wayground

60 questions

Geospatial Python libraries

Quiz

•

Professional Development

Popular Resources on Wayground

11 questions

Hallway & Bathroom Expectations

Quiz

•

6th - 8th Grade

10 questions

HCS SCI 03 Summer School Assessment 2

Quiz

•

3rd Grade

11 questions

Home Scope

Quiz

•

7th - 8th Grade

12 questions

2026 TAP Technology in the Classroom

Presentation

•

Professional Development

15 questions

HCS SCI 05 Summer School Assessment 2 Review

Quiz

•

5th Grade

15 questions

HCS SCI 04 Summer School Review 2

Quiz

•

4th Grade

59 questions

Geometry Unit 3 Review

Quiz

•

9th - 12th Grade

14 questions

FAST ELA READING SMAPLE TEST MATERIALS

Passage

•

3rd Grade

Discover more resources for Others

12 questions

2026 TAP Technology in the Classroom

Presentation

•

Professional Development

Moving and Positioning a Resident

What is the first step in moving a resident to the side of the bed?

It is important to identify yourself by name to the resident because:

What should you do after identifying yourself to the resident?

Explain the importance of washing your hands before moving a resident.

The purpose of explaining the procedure to the resident is to:

How can you provide privacy for the resident?

What should you adjust to a safe level before moving a resident?

Locking the bed wheels is important because:

What should you do with the head of the bed before moving a resident?

The process of using a draw sheet to move a resident involves:

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Others