Which of the following is NOT true of the Driver Control program on the EXP Brain?

• It allows you to drive the BaseBot or Clawbot without any coding

• It has only one driver configuration possible, and you cannot make any changes to it

• It has the option to be run for only one minute or two minutes

• Buttons and joystick configurations can be changed by the driver

Which of the following best describes how you start running the Driver Control program once your Controller and Brain are connected?

• On the Brain’s Home Screen, use the check button to select the Controller icon. Then press the check button again to select Run.

• On the Controller, move the joysticks forward and backward, and press the A and B buttons concurrently.

• In VEXcode EXP, select ‘File’ and ‘Open Examples’. Then select ‘Driver Control program’.

Which of the following is NOT a driver configuration in the Driver Control program on the EXP Brain?

• Split Arcade

• Left Arcade

• Penny Arcade

• Tank Drive

In the image below, the Right Controller buttons will move the motor that is connected to which port on the Brain?

• 1

• 3

• 4

• 6

Which of the following best describes how to change the direction a motor is moving with the Controller buttons?

• On the Brain’s Home Screen, select the Controller icon, then toggle to select ‘Run 1 minute’ and

  press the check button.

• On the Brain’s Home Screen, select the Controller icon, then toggle to ‘Controls’ and select it.

  Then toggle to the button you’d like to change, and use the check button to select ‘Forward’ or

  ‘Reverse’ for that port.

• On the Brain’s Home Screen, select the Controller icon, then toggle to ‘Controls’ and Tank Drive.

Based on the image of the Control screen shown below, which of the following is TRUE?

• The Left Buttons will not control anything, because port 3 is disconnected

• The Up and Down buttons are controlling the motor connected to port 8

• The Right Buttons will not control anything, because port 4 is disconnected

• The Up and Down buttons are set to move in Reverse direction

• Both A and C

Which of the following best describes the goal of the Speed and Score Challenge?

• To compete in a two on two match to steal rings from your opponent

• To grab and score both rings on the Field on the small post in the fastest time

• To grab and move both rings out of the Field in under a minute

• To code your robot to grab and score both rings autonomously

Which of the following is NOT part of the Speed and Score Challenge setup?

• A 3’ x 5’ Field with walls

• A small post connected to the tile in the center on one end of the Field

• Two rings placed along the wall

• Three red Buckyballs placed alongside the small post

In the Speed and Score Challenge, the timer stops when _________________.

• The first ring is scored on the small post

• The robot stops moving

• The second ring is scored on the small post

• When the timer reaches the maximum time of two minutes

• Both C and D

In order to be considered ‘scored’, a ring must be ________________ in the Speed and Score Challenge.

• Completely around the small post

• Hanging on the small post

• Touching the small post in any way

• In its starting position on the Field