What does 'constraints' typically refer to in engineering design?

Limitations that impact the design solution

Which skill is most critical when developing possible solutions?

Critical thinking and creativity

What is the primary benefit of prototyping in the Engineering Design Process?

To test and refine design solutions before final implementation

An action performed by the robot.

How to break down instructions into simpler tasks.

How robots communicate with a person.

The way robots send information back to the user.

Where does Tracy always start in the grid world?

(0, 0) coordinate in the middle of the canvas

(0, 0) coordinate in the bottom left hand corner of the canvas

(-200, -200) coordinate in the bottom left hand corner of the canvas

(-200, -200) coordinate in the middle of the canvas

Which of the following is NOT a reason for loops are useful when writing code?

Loops let us make shapes of multiple sizes

Loops help use write the same program with fewer lines of code.

Loops make it easier to alter code once it's written.

Loops make our code easier to read

Why do certain words change color in Python?

To show that they are recognized as key words

To tell you that these words cannot be used in Python

To show you that these words can be clicked

To tell Python to skip these words when running the code

Written for humans to read and understand

Only needed when a program is over 50 lines

Commands performed by the computer

Always blue when Python recognizes them

What values does the <Pressing bumper> block return?

TRUE (pressed) or FALSE (released).

Positive (pressed); Negative (released).

Number values between one and ten.

Distance from object in millimeters (mm).

What will happen when the Bumper Sensor is pressed in this project?

The VR Robot will drive in reverse for 200 millimeters (mm).

The VR Robot will turn left for 90 degrees.

The VR Robot will turn right for 90 degrees.

Which statement is TRUE for waiting blocks?

They pause the stack until that block's behavior has been completed.

They wait for the user to select the "Step" button.

They wait until the VR Robot has enough power to complete the task.

They allow the rest of the stack to continue even if that block's behavior has not been completed.

How is the <Pressing bumper> block used in this project?

It checks the condition of the Bumper Sensor. When TRUE, the VR Robot will turn right 180 degrees.

It pauses the project indefinitely.

It causes the VR Robot to move forward for 200 millimeters (mm).

It instructs the VR Robot to turn to 90 degrees.

What is the order in which behaviors will be executed in this project?

Drive Forward until Left Bumper is pressed, Turn right for 90 degrees, Drive Forward until Left Bumper is pressed, Turn Left for 90 degrees, Drive Forward.

Drive Forward; Turn Right for 90 degrees; Drive Forward when Left Bumper is pressed; Turn Left for 90 degrees\: Drive Forward when Left Bumper is Pressed.

Drive Forward until Right Bumper is pressed, Turn Left for 90 degrees, Drive Forward, Turn Left for 90 degrees, Drive Forward.

Drive Forward, Turn Right for 90 degrees, Drive Forward until Left Bumper is pressed, Turn Left for 90 degrees, Drive Forward until Left Bumper is Pressed.

What does the conditional evaluate in the [Wait until] block?

Has the Distance Sensor found an object in front of the VR Robot.

Is the Color sensor close to an object.

Where is the "Step" function located on the VEX VR interface?

In the toolbar between the "Start" and "Stop" buttons.

This project was used to drive the VR Robot from Start to the number '1' in the Wall Maze Playground, but does not work correctly. What is the error?

The project is missing a [Drive] block.

The Robot stops before it reaches the number "1".

Sequence of the blocks is incorrect.

The last [Turn for] should be right instead of left.

Which of the following is the best description of the [Drive for] block?

Moves the VR Robot forward or backwards a specific distance.

Moves the VR Robot backward indefinitely.

Moves the VR Robot left or right.

Moves the VR Robot forward indefinitely.

How can you make the VR Robot move in reverse on the [Drive for] block?

Changing the "forward" parameter to "reverse".

Changing millimeters (mm) to Inches.

Moving the block to the bottom of the project.

Which of the following is the best description of what the Distance Sensor does in a project?

To measure the distance between the front of the Distance Sensor and the object.

To report the location angle of the VR Robot.

To change behaviors of the VR Robot if pressed.

To report the current heading of the VR Robot.

Which of the following best describes what the <Greater than> block reports?

If the first value is larger than the second value.

If the first value is less than the second value.

If the first value and the second value are equal.

Which of the following is the best description of what a <Less than> block reports while inside of a [Wait until] block?

If the distance is a large number.

The total time needed to run the project.

The total time the VR Robot has until it reaches an object.

Which is an advantage of being able to monitor sensor values in the Monitor Console when creating VEXcode VR projects?

Allows the user to see what is happening in a VEXcode VR project in real time.

Allows the user to control what is happening in a VEXcode VR project.

Allows the user to see what is happening in the Playground Dashboard.

Allows the user to see a breakdown of each VEXcode VR project step.

How can you monitor the value of the Distance Sensor in the Monitor Console?

Select the checkbox next to the or (Distance from) block.

Select the checkbox next to the (Position of Robot) block.

Select the checkbox next to the block.

Which of the following describes why the VR Robot will not move in this example project?

The distance between the Distance Sensor and the object is greater than 150 millimeters (mm) away.

The distance between the Distance Sensor and the object is less than 150 millimeters (mm) away.

The Eye Sensor is reporting the color red.

The VR Robot will immediately crash into a wall if it moves.

Which of the following best describes what the <Less that> block reports?

If the first value is less than the second value.

If the first value is larger than the second value.

If the first value and the second value are equal.

2025 Robotics Final

Authored by Jennifer Waters

Computers

9th - 12th Grade

Used 7+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

50 questions

Show all answers

MULTIPLE CHOICE QUESTION

1 min • 2 pts

What is the primary purpose of the first step in the Engineering Design Process?

To generate random ideas

To clearly define and understand the problem

To immediately start building a solution

To test the final product

MULTIPLE CHOICE QUESTION

1 min • 2 pts

Which step in the Engineering Design Process involves generating multiple potential solutions and designs?

Plan

Brainstorming

Test and Evaluate

Communicate Results

MULTIPLE CHOICE QUESTION

1 min • 2 pts

Why is creating multiple design solutions important in the engineering process?

To waste time

To confuse the design team

To explore different approaches and find the most effective solution

To make the project more complicated

MULTIPLE CHOICE QUESTION

1 min • 2 pts

What is the primary goal of the 'Test and Evaluate' step in the Engineering Design Process?

To prove the first design is perfect

To determine if the solution meets the original requirements

To stop the design process

To create unnecessary complications

MULTIPLE CHOICE QUESTION

1 min • 2 pts

Which step involves gathering information and understanding constraints of a design challenge?

Develop Possible Solutions

Research

Test and Evaluate

Communicate Results

MULTIPLE CHOICE QUESTION

1 min • 2 pts

What does 'iterative' mean in the context of the Engineering Design Process?

A one-time linear process

A process that involves repeated cycles of design, testing, and improvement

A process that never changes

A random approach to problem-solving

MULTIPLE CHOICE QUESTION

1 min • 2 pts

Why is communication an important final step in the Engineering Design Process?

To create unnecessary paperwork

To share findings, solutions, and learn from the design experience

To confuse other team members

To stop further innovation

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

50 questions

Summative Test - TLE – CSS 10

Quiz

•

10th Grade

50 questions

Q.2 Keamanan komputer dan server OS

Quiz

•

11th Grade

50 questions

Web Authoring (10th)

Quiz

•

8th - 12th Grade

50 questions

TIK Kelas 9

Quiz

•

9th Grade

49 questions

PENGENDALI SISTEM ROBOTIK

Quiz

•

12th Grade

50 questions

ATS Informatika Genap

Quiz

•

10th Grade - University

45 questions

Computer memory

Quiz

•

10th Grade

50 questions

CSS 9- Third Quarter Periodic Examination

Quiz

•

9th Grade

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

54 questions

Analyzing Line Graphs & Tables

Quiz

•

4th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

Discover more resources for Computers

18 questions

[AP CSP] JavaScript Programming Lesson 2025-2026

Lesson

•

9th - 12th Grade

57 questions

[AP CSP] Unit 5 Review: Internet & Cybersecurity

Quiz

•

9th - 12th Grade

10 questions

Exploring Digital Citizenship Essentials

Interactive video

•

6th - 10th Grade