
ASE Test Preparation FOR THE G1
Authored by John Branch
Instructional Technology
10th Grade
Used 9+ times

AI Actions
Add similar questions
Adjust reading levels
Convert to real-world scenario
Translate activity
More...
Content View
Student View
55 questions
Show all answers
1.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Technician A says that when pressure testing a radiator cap, a special adapter is needed. Technician B says the best way to check thermostat operation is while it is in the engine. Who is right?
Technician A only
Technician B only
Both A and B
Neither A or B
2.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
A technician is checking resistance in an engine's spark plug wires using an ohmmeter. A general rule is to replace a wire if resistance is over:
50,000 ohms
30,000 ohms
35,000 ohms
25,000 ohms
3.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Technician A says that in an ignition system, the voltage supplied to the coil during starting is battery voltage. Technician B says the coil uses electromagnetic induction to create high voltage. Who is right?
Technician A only
Technician B only
Both A and B
Neither A or B
4.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
A Front Wheel Drive (FWD) vehicle with an automatic transaxle has excessive vibration. Technician A says that the vibration could be caused by worn engine/transaxle mounts. Technician B says that the vibration could be caused by a misaligned engine/transaxle subframe. Who is right?
Technician A only
Technician B only
Both A and B
Neither A or B
5.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
A technician suspects that a faulty camshaft sensor causes a driveability complaint. The sensor is equipped with a three-wire connector. What type of sensor is this?
A. Hall effect type
B. a magnetic reluctance type
C. an inductive resistance type
D. none of the above
6.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
All of the following can cause a problem in the Hydro-boost system EXCEPT:
loose power steering pump belt
leaking power steering hoses
low power steering pump pressure
leaking check valve
7.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Technician A says that if a wire is getting too hot, it's a sign of higher-than-normal current flowing through. Technician B says the wire would heat up if some of the individual strands are broken inside the wire insulation. Who is right?
Technician A only
Technician B only
Both A and B
Neither A or B
Access all questions and much more by creating a free account
Create resources
Host any resource
Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever
or continue with

Microsoft
%20(1).png)
Apple
Others
Already have an account?