Networking Quiz

Refer to the exhibit. PC A sends a request to Server B. What IPv4 address is used in the destination field in the packet as the packet leaves PC A?

• 192.168.11.1

• 192.168.10.1

• 192.168.12.16

• 192.168.10.10

What does R1 use as the MAC address of the destination when constructing the frame that will go from R1 to Server B?

• If the destination MAC address that corresponds to the IPv4 address is not in the ARP cache, R1 sends an ARP request.

• R1 uses the destination MAC address of S1.

• The packet is encapsulated into a PPP frame, and R1 adds the PPP destination address to the frame.

• R1 leaves the field blank and forwards the data to the PC.

What route would have the lowest administrative distance?

• a route received through the OSPF routing protocol

• a directly connected network

• a static route

• a route received through the EIGRP routing protocol

What characteristic completes the following statement? When an IPv6 static route is configured, as a backup route to a static route in the routing table, the "distance" command is used with ……

• the "show ipv6 route static" command.

• an administrative distance of 2.

• a destination host route with a /128 prefix.

• the interface type and interface number.

A router has used the OSPF protocol to learn a route to the 172.16.32.0/19 network. Which command will implement a backup floating static route to this network?

• ip route 172.16.0.0 255.255.224.0 S0/0/0 100

• ip route 172.16.0.0 255.255.240.0 S0/0/0 200

• ip route 172.16.32.0 255.255.224.0 S0/0/0 200

• ip route 172.16.32.0 255.255.0.0 S0/0/0 100

Consider the following command: ip route 192.168.10.0 255.255.255.0 10.10.10.2 5 How would an administrator test this configuration?

• Delete the default gateway route on the router.

• Manually shut down the router interface used as a primary route.

• Ping from the 192.168.10.0 network to the 10.10.10.2 address.

• Ping any valid address on the 192.168.10.0/24 network.

Refer to the exhibit. Which type of IPv6 static route is configured in the exhibit?

• floating static route

• fully specified static route

• recursive static route

• directly attached static route

Refer to the exhibit. What will the router do with a packet that has a destination IP address of 192.168.12.227?

• Drop the packet.

• Send the packet out the GigabitEthernet0/0 interface.

• Send the packet out the Serial0/0/0 interface.

• Send the packet out the GigabitEthernet0/1 interface.

Consider the following command: ip route 192.168.10.0 255.255.255.0 10.10.10.2 5 Which route would have to go down in order for this static route to appear in the routing table?

• a default route

• a static route to the 192.168.10.0/24 network

• an OSPF-learned route to the 192.168.10.0/24 network

• an EIGRP-learned route to the 192.168.10.0/24 network

What are two advantages of static routing over dynamic routing? (Choose two.)

• Static routing requires very little knowledge of the network for correct implementation.

• Static routing is more secure because it does not advertise over the network.

• Static routing is relatively easy to configure for large networks.

• Static routing uses fewer router resources than dynamic routing.

• Static routing scales well with expanding networks.